{{ variable.name }}
On-board screw airend with 540 V motor option, 2.2-4 kW, 12.5 bar maximum working pressure, oil carry-over below 2 ppm.
This integrated screw air compressor is a dedicated on-board air source for battery-electric buses. The screw airend, the oil-gas separator tank with built-in coarse separator, three filters and four valves are supplied as one 9-in-1 assembly measuring 410 x 330 x 310 mm and weighing 45 kg, so no separate compressor room is needed on the chassis. The 540 V motor option matches high-voltage electric bus platforms, while the 2.2-4 kW power band keeps auxiliary consumption inside a battery bus energy budget. Free air delivery is 0.25-0.4 m3/min at 7 bar, with a maximum working pressure of 12.5 bar for braking, door actuation and air suspension circuits. Oil carry-over stays below 2 ppm and noise is held to 75 dB(A) or lower.
Specified for high-voltage electric bus platforms; a 24 V DC version is available for other new energy commercial vehicle chassis.
Screw airend, oil-gas separator tank with built-in coarse separator, three filters and four valves arrive as one unit, reducing external piping and potential leak paths.
Oil carry-over is below 2 ppm to specification with a design limit of 3 ppm, protecting brake valves, air dryers and air springs downstream.
Low noise output limits transmission into the passenger compartment and to the street.
Compact, light package for underframe or rear-chassis mounting without a dedicated compressor room.
Matches the auxiliary energy budget of electric buses; free air delivery 0.25-0.4 m3/min at 7 bar.
| Power | 2.2-4 kW |
|---|---|
| Speed | 3500 rpm |
| Free air delivery at 7 bar | 0.25-0.4 m3/min |
| Working pressure | Maximum 12.5 bar / minimum 5 bar |
| Maximum discharge temperature | 105 C |
| Oil carry-over | Below 2 ppm (design limit 3 ppm) |
| Noise | 75 dB(A) or lower |
| Net weight | 45 kg |
| Dimensions (L x W x H, excl. air filter assembly) | 410 x 330 x 310 mm |
| Configuration | 9-in-1: screw airend + oil-gas separator tank (built-in coarse separator) + 3 filters (external fine oil separator, oil filter, air filter optional) + 4 valves (intake control valve, minimum pressure valve, thermostat valve, safety valve) |
| Motor options | 24 V DC / 540 V DC for electric bus and electric truck |
| Housing material | High-grade cast iron (aluminium-alloy housing under development) |
On electric buses the unit supplies brake circuits, door actuation and air suspension, as in the NEV OEM programme running at approximately 1,500 units per year. The same platform is used on new energy commercial vehicles, electric heavy trucks and electric mining trucks, and is supplied to compressor assemblers for stationary and vehicle compressor packages. The wider range also serves construction machinery, mining engineering vehicles, rail transit and special vehicles.
Motor voltage is selected per platform (24 V DC or 540 V DC) and the air filter can be specified as an option. For assemblers and OEM programmes, standardised mounting interfaces, stable batch quality and technical drawings support integration; the assembler programme referenced here runs at approximately 300 units per year. Aluminium-alloy housing development is under way for further weight reduction.
Approximately 1,500 units per year over three years for electric bus braking, door actuation and air suspension. Reported results: lightweight design and low energy consumption meeting the strict energy budget of electric buses, 35% volume reduction, noise of 75 dB(A) or lower, and the 540 V motor option.
Two options: 24 V DC and 540 V DC, covering electric bus and electric truck platforms. The choice is made against the vehicle DC bus.
Free air delivery is 0.25-0.4 m3/min at 7 bar, with a minimum working pressure of 5 bar and a maximum of 12.5 bar.
Oil carry-over is below 2 ppm to specification, with a design limit of 3 ppm, thanks to the built-in coarse separator plus oversized external fine separator.
105 C.
Screw airend, oil-gas separator tank with built-in coarse separator, three filters (external fine oil separator, oil filter, air filter optional) and four valves (intake control valve, minimum pressure valve, thermostat valve, safety valve).
CE under TUV Rheinland (CE-WSD-GCU-2023-001, MD 2006/42/EC, EN 1012-1, EN 60204-1, EN ISO 1217), IATF 16949 automotive quality management and ISO 9001:2015 certified by SGS (CN-ISO9001-WSD-2024-012).
The unit measures 410 x 330 x 310 mm excluding the air filter assembly and weighs 45 kg, which allows underframe or rear-chassis mounting.
Supplier: Wuxi Woyo Superdo Compressor Co., Ltd. (WOLXAIR), founded 1996, 20,000 m2 facility, 12,000 units annual output, 35 engineers.
Email: service@woyo.cn | Tel: +86 510 8599 6655 | WhatsApp: +86 189 1237 9878
Address: No.5 Changkang Road, Mashan, Binhu District, Wuxi, Jiangsu, China
Send your vehicle platform, DC bus voltage, required pressure and flow so the correct motor option and configuration can be quoted.