{{ variable.name }}
Large diameter high chromium alloy cast balls with the high toughness solution recommended for strong impact duty
Page URL: /products/high-toughness-cast-steel-balls-70-140mm

This variant covers the large diameter half of the cast steel ball range made by Zouping Huiteng Metal Abrasives Co., Ltd.: 70, 80, 90, 100, 110, 120, 130 and 140 mm. The balls are cast in high chromium alloy, and for strong impact working conditions the manufacturer recommends the high toughness solution rather than the standard wear resistant option used in conventional scenarios.
The product family is built for high temperature and wear resistant service and is specifically designed for the power and environmental protection industry, with low maintenance cost as one of its stated benefits. Melting takes place in medium-frequency induction furnaces, followed by centrifugal atomization granulation, secondary quenching and tempering, rounding, screening and packaging.
70 to 140 mm in 10 mm steps lets a buyer match a large ball size to an existing mill or blasting line without special tooling.
For strong impact working conditions the manufacturer recommends the high toughness solution to keep the ball in service.
The alloy body provides the wear resistance of the product, and it is intended for high temperature duty as well.
The balls are specifically designed for these two industries, where heat and abrasion appear together and maintenance cost is watched closely.
Chemical composition and fatigue life are tested per batch, with pre-shipment sampling inspection under an ISO9001 system.
The company sells direct and reports roughly 100,000 tons of annual production capacity from a 20,000 m² factory.
| Product name | Cast Steel Ball |
|---|---|
| Manufacturer | Zouping Huiteng Metal Abrasives Co., Ltd. |
| Material | High chromium alloy |
| Diameters in this variant | 70 / 80 / 90 / 100 / 110 / 120 / 130 / 140 mm |
| Working condition | Strong impact duty; high toughness solution recommended |
| Melting | Medium-frequency induction furnace |
| Granulation | Centrifugal atomization |
| Heat treatment | Secondary quenching and tempering |
| Finishing | Rounding, screening, packaging |
| Batch testing | Chemical composition, fatigue life, pre-shipment sampling |
| Quality system | ISO9001 |
| Annual capacity | Approximately 100,000 tons |
High chromium alloy is melted in medium-frequency induction furnaces and granulated by centrifugal atomization. Secondary quenching and tempering follow, then rounding, screening and packaging. The same production workflow applies across the 70-140 mm steps, so a large diameter order keeps the same alloy and heat treatment route as the rest of the range.
The balls are designed for high temperature and wear resistant service in the power industry and the environmental protection industry, where strong impact working conditions call for the high toughness solution and low maintenance cost guides the purchase decision. The company's abrasives are also supplied to casting, forging, steel structure, shipbuilding, automotive and mining customers.
As a custom metal manufacturer selling direct, the company can discuss customized solutions for different application requirements. Share the ball diameter, the impact level of the working condition and the annual volume, and the team will advise on size and solution selection within the 20-140 mm range.
70, 80, 90, 100, 110, 120, 130 and 140 mm, in 10 mm steps.
The manufacturer recommends the high toughness solution for strong impact working conditions, which is the duty this large diameter variant is offered against.
High chromium alloy, with the same melting, atomization and quenching and tempering route as the rest of the range.
The power and environmental protection industry, for high temperature and wear resistant service with low maintenance cost.
Each batch is tested for chemical composition and fatigue life, with pre-shipment sampling inspection under an ISO9001 quality management system.
Yes. The full cast steel ball range runs from 20 mm to 140 mm, and 20-60 mm can be quoted separately.
Email: fan@shot-s2u.com · Tel / WhatsApp: +86 188-5431-6114
Address: Qingyang Town Industrial Park, Zouping County, Binzhou City, Shandong Province, China
Send the required diameter, the impact level of your working condition and your annual volume for a quotation.
| cast-steel-ball-70-140mm-high-chromium-bulk.png | Alt: 70-140mm high chromium cast steel balls in bulk |
|---|---|
| cast-steel-ball-70-140mm-large-diameter-detail.png | Alt: Large diameter cast steel ball surface detail |
| cast-steel-ball-20-60mm-size-range.png | Alt: Smaller cast steel balls from 20mm to 60mm |
