{{ variable.name }}

Gravimetric liquid metering for DCP, BDP and paraffin, with 1 kW AC drive, single liquid metering pump and weighing sensor control.
The TG-LW-LF07W is a liquid loss-in-weight feeder for liquids that are handled warm on the line. A 7 L metering bin, a single liquid metering pump and a tetrafluoro soft connection form the standard feed module, and the weighing sensor (36 kg, 60 kg or 100 kg) reports the mass actually delivered. Operation is automatic: the unit holds a set feed rate in continuous loss-in-weight metering, or a set batch weight in intermittent loss-in-weight batch metering. Feed rate, weight data, equipment status and alarm information can be reported to a cloud management platform for centralized operation and maintenance. Typical liquids are DCP, BDP and paraffin.
| Parameter | Specification |
|---|---|
| Metering bin (standard) | 7 L |
| Drive motor | AC motor, 1 kW, 380 V |
| Liquid metering pump | Single pump |
| Soft connection | Tetrafluoro |
| Weighing sensor options | 36 kg / 60 kg / 100 kg |
| Weighing principle | Loss-in-weight (gravimetric) |
| Operation mode | Automatic, weighing sensor control |
| Heat preservation | Applied in the W configuration |
| Monitoring | Cloud management platform for feed rate, weight data, equipment status and alarms |
| Material | SS304 |
| Ambient temperature range | -10 C to 50 C |
| Installation environment | Outdoor installation, high humidity, dust |
| Electrical explosion-proof | Optional |
| Certification | CE; ISO 9001; ISO 14001 |
The heat-preservation range is designated TG-LW-LF07W, TG-LW-LF50W, TG-LW-LFA07W and TG-LW-LFA50W. The standard parameters listed above describe the 7 L metering bin build. Additional gravimetric feeder configurations can be customized according to the liquid characteristics and process requirements, so the matching code is confirmed against your liquid, its handling temperature and the required feed rate.
The metering bin and frame are SS304. The tetrafluoro soft connection links the metering bin to the liquid pump and keeps the weighing assembly clear of line movement. Weighing sensors are available in 36 kg, 60 kg and 100 kg capacities so the sensor can be matched to bin and pump load. The drive is a 1 kW AC motor on 380 V, and the standard liquid metering pump arrangement is a single pump.
Compounding plastics, chemicals, building materials, food, new energy and medical production lines. Liquids handled include pure water, white oil, DCP, BDP and paraffin. Units are specified for outdoor installation, high humidity and dust, across an ambient range of -10 C to 50 C, and support both continuous and intermittent loss-in-weight operation.
Beyond the standard build, additional gravimetric feeder configurations can be customized according to the liquid characteristics and process requirements. The electrical explosion-proof function is optional, and other special requirements are handled through customized design with fast response.
A one-year feeder program of 200 units was supplied to plastics compounding companies, food producers, chemical companies and users of other continuous production lines. Applications covered automatic food batching, metering of color masterbatch and modified-plastics ingredients, continuous feeding in extrusion, and ratio control and continuous conveying in chemical and building-material processes. Reported results were automated batching, more stable formula control and improved production efficiency. The same program also supplied feeder structures for powders, micro-additives, fibers and irregular materials.
CE verification of conformity ICR/VC/HFG260829, issued by ICR, covers EN ISO 12100:2010, EN 60204-1:2018+A1:2025, EN IEC 61000-6-2:2019 and EN IEC 61000-6-4:2019 for the TG-LW-LF07N/W, TG-LW-LF50N/W, TG-LW-LFA07N/W and TG-LW-LFA50N/W models. The factory holds ISO 9001:2015 certificate 38524UQN0DP2R0S and ISO 14001:2015 certificate 38524UE640TRR0S.
Which liquids is the heat-preservation version intended for?
DCP, BDP, paraffin and other liquids metered warm. For pure water and white oil at room temperature, the N configuration is the standard choice.
Can one feeder run both continuous and batch operation?
Yes. The unit is applied to continuous loss-in-weight metering and to intermittent loss-in-weight batch metering.
What power supply does it need?
A 1 kW AC motor on 380 V, with a single liquid metering pump as the standard arrangement.
How is the feeder monitored on site?
Operation is automatic under weighing sensor control, and feed rate, weight data, equipment status and alarms can be viewed through a cloud management platform.
Is explosion-proof execution available?
Electrical explosion-proof function is optional, and other special requirements are supported through customized design.
How do I confirm the right model and commercial terms?
Send the liquid name, handling temperature, required feed rate, batch size if intermittent, supply voltage and installation environment. The matching code and commercial terms are confirmed against that data.
Transcell Intelligent Machinery (Changzhou) Co., Ltd. - Building 9, No.9 Caoxi Road, Niutang Town, Wujin District, Changzhou, Jiangsu, China.
Email info@transcellgroup.com | Tel +86 400-068-3777 | WhatsApp +852 6952 8737 | www.transcellgroup.com
Primary: liquid-loss-in-weight-feeder-lf07w-heat-preservation-front.png - alt: Liquid loss-in-weight feeder front view with 7 L metering bin and single metering pump. Detail: liquid-loss-in-weight-feeder-lf07w-weighing-sensor-detail.png - alt: Weighing sensor and tetrafluoro soft connection on the liquid feeder metering section.