{{ variable.name }}
NKW80BD · 80-ton hydraulic power · 2–3 t/h capacity · 1100 × 850 × 1700 mm bales · 18 MPa hydraulic circuit · carbon steel frame
The NKW80BD is a semi-automatic horizontal hydraulic baler for recycling yards, transfer stations and in-plant waste rooms that need steady bale output without a fully automated line. A Ø200–3700 hydraulic cylinder working at 18 MPa compacts material through a 1200 × 1000 mm feed opening and ejects 1100 × 850 × 1700 mm bales at a rated 2–3 t/h, driven by a 22 kW / 30 HP motor.
Bales are tied with four strands of 10# baling wire and discharged horizontally for stacking, weighing or container loading. The machine weighs 14,500 kg and uses a fan-cooled hydraulic circuit; a matched feed conveyor, listed at 4,500 kg, can be added so loose material travels from the sorting area to the feed opening.



The Ø200–3700 cylinder runs at 18 MPa working pressure, pressing low-density waste into dense bales instead of loose material.
A 22 kW / 30 HP motor matches mid-size recycling volumes, keeping pace with a single sorting shift.
Flattened cartons, PET bottle collections and mixed packaging waste fit the opening, cutting manual size preparation.
A repeatable bale size makes stacking, weighing and container loading predictable run after run.
Four wire strands per bale hold compressed material together through handling, storage and transport.
The cooling fan stabilises oil temperature in day shifts, and the carbon steel body keeps the frame steady under repeated high-force cycles.
| Model | NKW80BD |
|---|---|
| Machine type | Semi-automatic horizontal hydraulic baler |
| Hydraulic power | 80 Ton |
| Cylinder size | Ø200–3700 |
| Working pressure | 18 MPa |
| Bale size (W × H × L) | 1100 × 850 × 1700 mm |
| Feed opening (L × W) | 1200 × 1000 mm |
| Capacity | 2–3 t/h |
| Motor power | 22 kW / 30 HP |
| Bale wire | 10# × 4 pcs |
| Cooling system | Cooling fan (water cooling / oil chiller available) |
| Machine weight | 14,500 kg |
| Feed conveyor weight | 4,500 kg (matched equipment) |
| Main material | Carbon steel |
Operating environment: indoor recycling workshop, ambient −10 °C to 45 °C, normal humidity, light dust, stable three-phase power supply.
The frame and compression chamber are fabricated from carbon steel, and the finished unit weighs 14,500 kg. That mass, combined with the 80-ton cylinder and the 18 MPa hydraulic circuit, keeps the structure steady during repeated compaction cycles. Material is loaded through the 1200 × 1000 mm opening, pressed into a 1100 × 850 × 1700 mm chamber, tied with four 10# wires and discharged horizontally.
The hydraulic power unit is driven by a 22 kW / 30 HP motor and cooled by a fan. A separate feed conveyor, 4,500 kg in weight, can be matched to the loading side of the machine for continuous feeding.
The NKW80BD handles the loose fractions that build up on recycling and production sites: waste paper and OCC cartons, plastics and PET bottles, scrap metal, textiles, agricultural straw and mixed solid waste. Typical projects include recycling-facility upgrades, new recycling plants, small processing workshops, and warehouse or industrial waste management.
Because the finished bales are uniform and wire-tied, the baler is also used in food, pharmaceutical, packaging, chemical, electronics and metal-processing plants that compact packaging waste before transport.
Waste paperPET bottlesPlasticsTextilesAgricultural strawMixed solid wasteConfiguration is confirmed against the real material stream. To specify a machine, send the material type, material dimensions, loose density, target bale weight or bale size, available floor space, power conditions, required automation level and expected throughput. Project requirements such as low-noise design, low energy consumption or integration with an existing conveyor line can be reviewed with the engineering team, and matched equipment — conveyors, hydraulic components, baling wire, PET strapping, jumbo bags, shredders and crushers — can be quoted alongside the baler.
Both share the 80-ton, 22 kW horizontal baler platform. This semi-automatic version is operated cycle by cycle; the fully automatic version runs a PLC-controlled cycle for continuous industrial duty.
Bales measure 1100 × 850 × 1700 mm (W × H × L). Bale weight depends on the loose density of your material and how the chamber is filled, so send a material description for an estimate.
The baler uses a 22 kW / 30 HP motor and needs a stable three-phase supply. Voltage and phase details are confirmed for each destination.
Each bale is tied with four strands of 10# baling wire. PET strapping and woven bags are listed among the matched packing materials.
The standard cooling fan suits normal indoor workshops within −10 °C to 45 °C ambient. Where conditions run hotter, a water cooling / oil chiller circuit can be specified.
The conveyor is listed separately at 4,500 kg. Confirm with the sales team whether your configuration is supplied as a standalone baler or as a baler and conveyor set.
The manufacturer holds a Verification of Conformity (No. DPWD/09/060/2024) to EN ISO 12100:2010, EN 60204-1:2018 and EN 415-1:2014 for the EU/EEA, plus a Machinery Directive attestation (EASY03220201M) covering EU/EEA and Türkiye.
Shaanxi Nick Machinery Equipment Co., Ltd. · founded 2013 · 5,000 m² factory · 50 employees · 90% of output exported to North America, South America and Asia.
Contact: Nick · Sales@nkbaler.com · Tel / WhatsApp +86 15021631102 · Chat on WhatsApp
Address: Qun Sheng Lu, Hui Shan Qu, WuXi Shi, Jiang Su Sheng, China · Download the horizontal baler catalogue
Send material type, dimensions, loose density, target bale size or weight, available space, power conditions, automation level and required throughput with your inquiry. The 80BD / 100BD PET bottle baling video is available on request.