{{ variable.name }}
A gearbox-integrated screw airend that combines the compression element, oil-gas separator tank, three filters and four valves in a single 96 kg assembly sized for power take-off and engine-driven air systems.

GCU30G integrated airend: gearbox interface, airend and separator tank in one housing
The GCU30G is an integrated screw compressor airend built for vehicle builders and compressor assemblers who drive the compressor from the engine power take-off. The gearbox is part of the airend housing, so the unit couples to the drivetrain instead of needing a separate belt drive and mounting frame. It delivers 2.5-3.3 m³/min at 7 bar from an 18-22 kW input, with a working pressure band of 5 to 12.5 bar and a speed range of 2,900-6,000 rpm. Oil carry-over stays below 2 ppm (design limit 3 ppm), maximum discharge temperature is 105 °C, and sound pressure is held at or below 75 dB(A). At 96 kg net and 560 x 490 x 580 mm excluding the air filter assembly, the assembly fits chassis bays where a separate airend, receiver and valve stack would not.
| Model | GCU30G |
|---|---|
| Type | Integrated screw airend with gearbox; PTO / engine driven |
| Rated power | 18-22 kW |
| Speed | 2,900-6,000 rpm |
| Free air delivery at 7 bar | 2.5-3.3 m³/min |
| Working pressure range | 5 bar minimum / 12.5 bar maximum |
| Max discharge temperature | 105 °C |
| Oil carry-over | Below 2 ppm (design 3 ppm or less) |
| Noise level | 75 dB(A) or less |
| Net weight | 96 kg |
| Dimensions (L x W x H) | 560 x 490 x 580 mm, excluding air filter assembly |
| Integrated configuration | 9-in-1: airend + oil-gas separator tank + 3 filters + 4 valves |

The 9-in-1 layout groups intake control, minimum pressure, thermostat and safety valves on one body
Concrete mixer truck and crane chassis pneumatic systems, bulk powder unloading.
Core compression unit for stationary and vehicle packages with standardised mounting interfaces.
Braking and auxiliary air supply on long-haul chassis.
Compact bodywork-mounted air source where installation space is limited.
For high-altitude programmes the same platform is configured with an altitude oxygen compensation intake port and a -40 °C to +50 °C operating design. Assemblers receive standardised mounting interfaces and technical drawings to shorten integration work. Housing material, intake filtration and pressure setting are selected at order stage; the air filter is optional when the customer supplies their own intake group.
Application: concrete mixer truck and crane chassis pneumatic system, bulk powder unloading. Reported result: field failure rate below 1% with unscheduled downtime reduced significantly. The dust-proof design, 35% smaller volume and easy chassis installation were the deciding factors for this programme.

Mounting base and drive side of the integrated airend
The screw airend, an oil-gas separator tank with built-in coarse separator, three filters (external fine oil separator, oil filter, optional air filter) and four valves: intake control valve, minimum pressure valve, thermostat valve and safety valve.
The GCU30G works between 5 bar minimum and 12.5 bar maximum. Published free air delivery of 2.5-3.3 m³/min is stated at 7 bar; confirm the duty point with our engineers before locking the drivetrain ratio.
Yes. The airend is built with an integrated gearbox for PTO and engine-driven systems, which is the intended mounting method for vehicle installations.
CE certificate CE-WSD-GCU-2023-001 issued by TUV Rheinland under MD 2006/42/EC, EN 1012-1, EN 60204-1 and EN ISO 1217 covering integrated airends from 2.2 to 45 kW; ISO 9001:2015 by SGS (CN-ISO9001-WSD-2024-012); and IATF 16949 automotive quality management system certification.
By combining the built-in coarse separator in the oil-gas tank with an oversized external fine separator, which also reduces the loading on downstream dryers and filters.
Yes. Standardised mounting interfaces and technical drawings are supplied to assemblers; the drawings describe the mounting points and interface dimensions of the delivered unit.
In the plateau locomotive retrofit programme, drop-in replacement units were delivered in 4-5 weeks against 8-10 weeks for imported airends. Current schedules are confirmed per order.
Wuxi Woyo Superdo Compressor Co., Ltd. (WOLXAIR), founded 1996, 20,000 m² production facility, 12,000 units annual output. Tell us your drive type, working pressure, required free air delivery and chassis interface so we can confirm the correct GCU30G configuration.
Email: service@woyo.cn · Tel: +86 510 8599 6655 · WhatsApp: +86 189 1237 9878 · Address: No.5 Changkang Road, Mashan, Binhu District, Wuxi, Jiangsu, China