{{ variable.name }}
Automatic purlin production line for steel frame construction, rolling C and Z purlins on one machine with PLC sizing and hydraulic cutting.




The Vantools C/Z purlin forming machine is an automatic production line that rolls both C and Z steel purlins from galvanized steel coil or PPGI in thicknesses from 1.5 mm to 3.0 mm. Changing between C and Z profile is a quick change operation, and purlin width is set automatically through the PLC and touch screen instead of manual roller adjustment. The line runs at 10-15 m/min with hydraulic cutting, and the forming stands are carried on a heavy welded steel frame.
Standard adjustment range is C100-C300 for C purlins and Z100-Z300 for Z purlins, within a model series designated C80-C300. Other section sizes are produced to the customer profile drawing. Nominal power is about 15 kW on 380V/50Hz/3-phase, with voltage and frequency customized for the destination market. Rollers are 45# steel with chrome plating on solid alloy steel shafts, which supports flat and straight purlin output over long production runs.
Profile type switches between C purlin and Z purlin by quick change, so roof purlins and wall girts are produced on the same machine instead of two separate lines.
The PLC and touch screen set purlin dimensions, which shortens size changeover compared with repositioning rollers by hand and reduces operator setting errors.
Chrome plated 45# steel rollers run on solid alloy steel shafts inside a heavy welded steel frame, keeping the section flat and straight through long runs.
Purlins are cut to length hydraulically on the same line, so the finished member leaves the machine ready for packing and site delivery.
Section size, adjustment range and voltage can be customized, which lets the line match the purlin profiles and power supply used on your project.
| Raw material | Galvanized steel coil / PPGI |
|---|---|
| Material thickness | 1.5-3.0 mm |
| Profile type | C purlin / Z purlin (quick change) |
| Adjustment range | C100-C300 / Z100-Z300 (customizable) |
| Forming speed | 10-15 m/min |
| Main structure | Heavy welded steel frame |
| Roller material | 45# steel, chrome plated |
| Shaft material | Solid alloy steel |
| Control system | PLC + touch screen |
| Cutting mode | Hydraulic cutting |
| Voltage | 380V/50Hz/3-phase (customizable) |
| Power | Approx. 15 kW |
| Weight | Customized by model |
The forming section is mounted on a heavy welded steel frame, which carries the shaft and roller load during continuous production. Forming rollers are machined from 45# steel and chrome plated, and each is mounted on a solid alloy steel shaft. Profile dimensions are set through the PLC and touch screen, and the finished purlin is separated by a hydraulic cutting unit. Control components are housed in the PLC cabinet with the touch screen interface.
The machine is built for steel frame construction projects where C and Z purlins form the roof and wall framing that carries cladding. Because C and Z profiles are produced on the same line with quick change, it suits workshops that supply mixed purlin schedules for industrial and commercial steel buildings, and contractors who need several section sizes from one production line.
Can one machine produce both C and Z purlins?
Yes. The line is built as a C/Z purlin machine with quick change between C purlin and Z purlin profiles, so both section types are produced on the same forming line.
Which purlin sizes are covered?
C100-C300 and Z100-Z300 in the standard configuration. The range is customizable and the model series is designated C80-C300. Send your section drawing for sizes outside the standard range.
What raw material can the machine run?
Galvanized steel coil and PPGI in thickness from 1.5 mm to 3.0 mm.
What is the forming speed?
10-15 m/min, with sizing set through the PLC and touch screen.
What power supply is required?
Approximately 15 kW on 380V/50Hz/3-phase as standard. Voltage and frequency are customized to your site.
How is the purlin cut to length?
Hydraulic cutting is used to cut the formed purlin to length.
Can the machine be built to our own profile drawing?
Yes. Section size is customized to the customer drawing, and OEM/ODM projects cover machine parameters, voltage and frequency, branding and packaging.
What support is provided after delivery?
7x24 remote technical support, online commissioning guidance and operator training. Inspection videos, paper inspection reports and material certificates are available on request.
Contact us for a quotation, layout drawing and demo video of the C/Z purlin forming machine.
Contact: Wendy
Email: wendy@vantoolsgroup.com
Tel: 86-19031155679
WhatsApp: +86 19031155679
Address: 063000, Qingbeidao 60#, Lubei District, Tangshan, China
Website: www.vantoolsgroup.com