{{ variable.name }}
An integrated screw airend built for high dust concentration, underground humidity and continuous heavy duty - dust-proof intake, sealed housing and a patented anti-oil-emulsification design.

Sealed housing and dust-proof intake of the mining-configuration GCU30G
Rock drills, jumbos and anchor rigs run in an environment where abrasive dust is constant and humidity is often high. This GCU30G build protects the air path with a dust-proof intake and a sealed integrated housing, and it carries the patented anti-oil-emulsification design so the oil charge does not break down when condensation forms in the separator tank. The compression side is unchanged: 2.5-3.3 m³/min at 7 bar from 18-22 kW, a 5-12.5 bar working band, 2,900-6,000 rpm, oil carry-over below 2 ppm (design 3 ppm) and 75 dB(A) or less. For machines working at altitude the same platform accepts an altitude oxygen compensation port. At 96 kg and 560 x 490 x 580 mm it mounts on the rig frame without an extra receiver or valve cabinet.
| Model | GCU30G (mining configuration) |
|---|---|
| Type | Integrated screw airend with gearbox; PTO / engine driven |
| Rated power | 18-22 kW |
| Speed | 2,900-6,000 rpm |
| Free air delivery at 7 bar | 2.5-3.3 m³/min |
| Working pressure range | 5 bar minimum / 12.5 bar maximum |
| Intake protection | Dust-proof intake; sealed housing |
| Oil system protection | Patented anti-oil-emulsification design (ZL2025 1 1888313X) |
| Oil carry-over / max discharge temperature | Below 2 ppm (design 3 ppm) / 105 °C |
| Noise level | 75 dB(A) or less |
| Net weight / dimensions | 96 kg; 560 x 490 x 580 mm excluding air filter assembly |

Rotor set and heavy-duty bearings configured for 24/7 duty cycles
Pneumatic power source for rock drilling rigs, mining jumbos and anchor drill rigs.
Braking, unloading and tyre inflation air supply, including units developed for operation above 4,000 m.
High dust concentration and high humidity sites with continuous heavy-duty cycles.
Municipal and port equipment working in dusty, frequent start-stop duty.
Mining builds are specified around dust protection, the sealed housing and the anti-oil-emulsification design; the intake arrangement is matched to the rig builder's multi-stage filter where one is already fitted, and the pressure setting is fixed to the drill or brake circuit. An altitude oxygen compensation port can be added for high-elevation sites, and technical drawings with standardised mounting interfaces are supplied for frame integration.
Application: rock drilling rig, mining jumbo and anchor drill rig pneumatic power source. Reported result: stable operation in high-dust and high-humidity underground and open-pit sites, supported by the dust-proof intake, sealed housing and patented anti-oil-emulsification design.
A mining-dedicated unit developed jointly for braking, unloading and tyre inflation air supply, with altitude adaptation for sites above 4,000 m.

Compact frame mounting that keeps the air source clear of dust build-up zones
Through a dust-proof intake plus a sealed integrated housing, so abrasive particles are stopped before reaching the rotor set and the compression chamber stays closed against airborne dust.
It is a patented method and system for preventing oil emulsification in vehicle screw air compressors, covered by CNIPA invention patent ZL2025 1 1888313X; the patent is also open to PCT filing on request.
Yes. An altitude oxygen compensation intake port can be specified; units in this family are in service above 4,000 m in mining truck applications and up to 5,000 m in rail applications.
The three filters and four valves are part of the integrated assembly, so service work is concentrated on one body rather than spread across separate manifolds; filtration service intervals follow the rig duty cycle.
CE certificate CE-WSD-GCU-2023-001 from TUV Rheinland for integrated airends from 2.2 to 45 kW, ISO 9001:2015 by SGS, and IATF 16949 automotive quality management system certification.
The unit is delivered as one integrated assembly with gearbox interface, oil-gas separator tank, filters and valves; drawings and mounting interfaces are issued for rig integration.
Tell us the machine type, dust and humidity conditions, operating altitude and required pressure, and we will confirm the mining configuration of the GCU30G.
Email: service@woyo.cn · Tel: +86 510 8599 6655 · WhatsApp: +86 189 1237 9878 · Address: No.5 Changkang Road, Mashan, Binhu District, Wuxi, Jiangsu, China