HTNXT
Menu
Flexible-Foil Vibration-Damping Copper-Aluminum Transition Busbar
Flexible-Foil Vibration-Damping Copper-Aluminum Transition Busbar

Flexible-Foil Vibration-Damping Copper-Aluminum Transition Busbar

Quantity:
SKU: 2448073112
Model: 62-23-335-180_AA-LOWER_INTERNAL-

{{ variable.name }}

{{ value.name }}
Products / flexible-rigid-copper-aluminum-transition-busbar

Flexible-Foil Vibration-Damping Copper-Aluminum Transition Busbar

A hybrid busbar assembly that pairs a flexible C11000 copper foil section with rigid 1060-O aluminum terminals for EV battery module and PACK connections. The foil absorbs vibration and assembly movement while the aluminum ends provide a direct, lightweight terminal interface.

Flexible-rigid copper-aluminum transition busbar with PVC insulation and nickel-plated aluminum terminals

Built for movement, not just current

The flexible copper section and rigid aluminum terminals handle two different jobs in one part: strain relief at the connection and a stable bolt interface at the battery terminal.

≥ 2500 NWeld zone shear strength
4000 V DCDielectric withstand, 60 s
−40 to +105 °CTemperature resistance
UL 94 V-0PVC insulation rating

Product Summary

This copper-aluminum transition busbar combines a flexible copper foil conductor with rigid aluminum terminal ends. The copper foil accommodates vibration and mechanical movement in service and during assembly, while the 1060-O aluminum terminals are designed for direct connection to aluminum battery terminals. A controlled copper-aluminum welding process joins the two metals, and the weld zone is specified at ≥ 2500 N shear strength.

The conductive assembly is PVC dip-coated to 1–1.5 mm, nickel plated, and specified for −40 to +105 °C. Electrical insulation performance includes ≥ 500 MΩ insulation resistance at 1000 V DC and a 4000 V DC dielectric withstand test for 60 seconds with leakage current below 0.5 mA. The part is made to drawing for battery module interconnection and PACK main-circuit layouts.

Key Features

Flexible Foil Strain Relief

The C11000 copper foil section absorbs vibration and assembly stress, reducing the risk of connection loosening and overheating at the terminal interface.

Direct Aluminum Connection

Rigid 1060-O aluminum terminals allow direct connection to aluminum battery terminals, removing an additional dissimilar-metal interface at the joint.

Controlled Cu-Al Weld

The controlled copper-aluminum welding process creates a reliable dissimilar-metal bond, with weld zone shear strength specified at ≥ 2500 N.

PVC Dip-Coated Insulation

A 1–1.5 mm PVC coating provides ≥ 500 MΩ insulation resistance and 4000 V DC dielectric withstand for 60 seconds with leakage below 0.5 mA.

Nickel-Plated Surfaces

Nickel plating with Ra ≤ 0.8 μm surface roughness and ≤ 50 RFU cleanliness supports stable contact interfaces.

Made to Drawing

Dimensions, mounting hole positions and terminal lengths are customized for battery module and PACK main-circuit layouts.

Technical Specifications

Model62-23-335-180_AA-LOWER_INTERNAL-
TypeCopper-aluminum transition flexible and rigid busbar
Conductive materialsC11000 copper foil and 1060-O aluminum
Insulation materialPVC dip-coated insulation
Insulation thickness1–1.5 mm
Surface finishNickel plating
Temperature resistance−40 to +105 °C
Flammability ratingUL 94 V-0
Surface roughnessRa ≤ 0.8 μm
Cleanliness≤ 50 RFU
Insulation resistance≥ 500 MΩ at 1000 V DC for 60 seconds
Dielectric withstand voltage4000 V DC for 60 seconds; no dielectric breakdown; leakage current < 0.5 mA
Weld zone shear strength≥ 2500 N
Pull-out forceTensile strength of the material × cross-sectional area of the aluminum busbar × 0.3
CustomizationDimensions, mounting hole positions and terminal lengths

Models and Options

This page covers the 62-23-335-180_AA-LOWER_INTERNAL- assembly. Dimensions, mounting hole positions and terminal lengths are customized to the battery module or PACK interface, so the part is quoted against the customer drawing rather than a fixed catalogue size.

Model 62-23-335-180_AA-LOWER_INTERNAL-Custom hole positionsCustom terminal lengthsCustom dimensions

Materials and Structure

The conductive path uses C11000 copper foil for the flexible section and 1060-O aluminum for the rigid terminals. The copper-aluminum weld is controlled to create a reliable dissimilar-metal bond. A PVC dip coating of 1–1.5 mm provides the insulation layer, and the part is nickel plated.

The structure separates the two mechanical duties: the foil section flexes with vibration and assembly movement, while the aluminum terminals hold the bolt interface. This is the basis for the direct aluminum terminal connection and the vibration tolerance of the assembly.

PVC-insulated copper foil and aluminum terminal structure of the transition busbar

C11000 copper foil flexible section with rigid 1060-O aluminum terminals and nickel plating.

Applications

The busbar is used in automotive manufacturing for EV battery module interconnection and PACK main-circuit connections. The flexible foil section is intended for connections where vibration and mechanical movement occur, while the aluminum terminals serve the end connection to aluminum battery terminals.

EV battery module interconnectionBattery PACK main circuitAluminum battery terminal interfaceVibration-prone connections

Customization

Custom dimensions, mounting hole positions and terminal lengths are available to match module and PACK layouts. RHI supports drawing review, DFM analysis, prototype validation, APQP and PPAP, and mass production across its production bases. Provide the terminal interface, hole pattern and target assembly envelope when requesting a quotation.

Compliance and Testing

The PVC dip-coated insulation has a UL 94 V-0 flame retardant test report issued by CTI (CNAS), report A2260546784101E, tested to UL 94-2023. RoHS test reports are available for the 1060-O aluminum busbar (report A2260220287101001C, CNAS/CMA) and the nickel-plated copper foil (report A2260444277101004E, CNAS/CMA), both to RoHS Directive 2011/65/EU with amendment (EU) 2015/863.

UL 94 V-0 test reportRoHS – 1060-O aluminumRoHS – nickel-plated copper foilIATF 16949 facility

FAQ

What is the model number of this busbar?

The model shown is 62-23-335-180_AA-LOWER_INTERNAL-. It is a copper-aluminum transition flexible and rigid busbar assembly.

Can it connect directly to aluminum battery terminals?

Yes. The rigid terminals are 1060-O aluminum, allowing direct connection to aluminum battery terminals and avoiding an additional dissimilar-metal interface at that joint.

What insulation and flammability rating does it use?

The part uses PVC dip-coated insulation at 1–1.5 mm thickness, supported by a UL 94 V-0 flame retardant test report.

What dielectric and insulation resistance values are specified?

Dielectric withstand is 4000 V DC for 60 seconds with no breakdown and leakage current below 0.5 mA. Insulation resistance is ≥ 500 MΩ at 1000 V DC for 60 seconds.

How strong is the copper-aluminum weld?

Weld zone shear strength is specified at ≥ 2500 N.

Can dimensions and hole positions be customized?

Yes. Dimensions, mounting hole positions and terminal lengths are customized for module interconnection and PACK main-circuit layouts.

What is the operating temperature range?

The specified temperature resistance range is −40 to +105 °C.

Which compliance reports are available?

UL 94 V-0 report A2260546784101E (CTI, CNAS) and RoHS reports A2260220287101001C and A2260444277101004E (CTI, CNAS/CMA).

Inquiry Information

Send your drawing, terminal interface and hole-position requirements to our engineering sales team.

Contact
Mr. Wu
Tel
+86 577 6198 8777
WhatsApp
+86 158-6802-5551
Company
Zhejiang RHI Electric Co., Ltd.

Image Filename and Alt Suggestions

Main imageflexible-rigid-copper-aluminum-busbar-62-23-335-180-hero.png — Flexible-rigid copper-aluminum transition busbar with PVC insulation and nickel-plated aluminum terminals
Main imagecopper-aluminum-busbar-62-23-335-180-foil-section.png — C11000 copper foil flexible section of the transition busbar
Detail imagecopper-aluminum-busbar-62-23-335-180-pvc-coating.png — PVC dip-coated insulation on the copper-aluminum busbar
Detail imagecopper-aluminum-busbar-62-23-335-180-weld-zone.png — Controlled copper-aluminum weld zone on the transition busbar
Nickel-plated copper-aluminum busbar assembly with PVC insulationCopper-aluminum transition busbar terminal and mounting hole detail