{{ variable.name }}
SEO TitleFully Automatic Horizontal Hydraulic Baler NKW180BD 180 Ton 6-8 T/H
Meta DescriptionNKW180BD fully automatic horizontal hydraulic baler 180-ton press force, 6-8 t/h output, 1100x1150x1800 mm bales, 45 kW motor and water-cooling or oil chiller.
URL Slug/fully-automatic-horizontal-hydraulic-baler-nkw180bd

The NKW180BD is a fully automatic horizontal hydraulic baler produced by Shaanxi Nick Machinery Equipment Co., Ltd. for recycling plants, warehouses and industrial waste departments that need to turn loose material into dense, stackable bales. A 180-ton hydraulic press working at 21 MPa compresses material entering through a 2400 x 1100 mm feed opening into bales of 1100 x 1150 x 1800 mm. Rated capacity is 6-8 tonnes per hour, driven by a 45 kW / 60 HP main motor, and the automatic cycle runs on a PLC-controlled sequence for continuous industrial duty.
| Model | NKW180BD |
|---|---|
| Baler type | Fully automatic horizontal hydraulic baler |
| Hydraulic power | 180 ton |
| Working pressure | 21 MPa |
| Cylinder size | Ø300-4300 |
| Bale size (W x H x L) | 1100 x 1150 x 1800 mm |
| Feed opening (L x W) | 2400 x 1100 mm |
| Capacity | 6-8 t/h |
| Main motor power | 45 kW / 60 HP |
| Bale wire | 6# / 8# x 5 pcs |
| Chain steel conveyor | 5.5 kW motor |
| Machine weight | 24,000 kg |
| Overall length x width | 14,000 x 2,000 mm |
| Cooling system | Water cooling / oil chiller |
| Main material | Carbon steel |
| Working environment | Indoor recycling workshop, -10 °C to 45 °C, normal humidity, light dust, stable three-phase supply |
The NKW180BD platform is offered in two automation levels. The fully automatic version shown on this page uses a PLC-controlled cycle for continuous operation and is the usual choice when the machine runs through long shifts with a steady material stream. The semi-automatic version of the same platform keeps the operator in the cycle and suits workshops where material types and volumes change through the day. Both versions share the 180-ton press, the 2400 x 1100 mm feed opening and the 6-8 t/h capacity band.
Cooling: water cooling or oil chillerBale wire 6# / 8# x 5 pcs5.5 kW chain steel conveyor45 kW / 60 HP main motor
The main structure is built in carbon steel, with a machine weight of 24,000 kg to hold the frame steady under repeated high-pressure strokes. The hydraulic circuit runs at 21 MPa with a cylinder size of Ø300-4300, and heat is managed by a water cooling circuit or an oil chiller depending on the configuration ordered. The complete unit measures 14,000 x 2,000 mm, and the 5.5 kW chain steel conveyor is matched to the baler as auxiliary equipment.
Documentation supplied with the company product line includes an EU Verification of Conformity (No. DPWD/09/060/2024) against EN ISO 12100:2010, EN 60204-1:2018 and EN 415-1:2014, issued 19 September 2024 and valid to 18 September 2029, plus a Machinery Directive attestation (EASY03220201M) against EN ISO 12100:2010 and EN 60204-1:2018, issued 22 March 2022 and valid to 21 March 2027.
The NKW180BD is used on waste paper and cardboard, plastics, scrap metal, textiles, agricultural straw and mixed solid-waste streams. Typical host industries are food, pharmaceuticals, packaging, chemicals, electronics, metals, waste treatment and recycling. It suits indoor recycling workshops, recycling-facility upgrades, new recycling plants, small processing workshops and warehouse or industrial waste management projects.
Equipment can be quoted as a single baler or as part of a complete line, together with matching conveyors, hydraulic components, baling wire, PET strapping, jumbo bags, packing tools, shredders and crushers. To confirm the model and the configuration, please send the material type, material dimensions, loose density, target bale weight or size, available floor space, power conditions, required automation level and required throughput.
Waste paper and cardboard, plastics, scrap metal, textiles, agricultural straw and mixed solid waste are the documented streams. The material is fed through a 2400 x 1100 mm opening, so sheet and bulky items need to fit that opening.
Bales measure 1100 x 1150 x 1800 mm (W x H x L) and are tied with 5 pieces of 6# or 8# baling wire. Share your target bale weight when enquiring so the configuration can be confirmed against your material.
The main motor is 45 kW / 60 HP and the chain steel conveyor uses a 5.5 kW motor. A stable three-phase supply is required, and the machine is intended for indoor installation at -10 °C to 45 °C with normal humidity and light dust.
Two cooling options are listed for this model: water cooling or an oil chiller. Your choice depends on the ambient conditions in your workshop and how many hours the baler runs per day.
Both are built on the same NKW180BD platform with 180-ton press force, 2400 x 1100 mm feed opening and 6-8 t/h capacity. The fully automatic version is PLC-controlled for continuous duty; the semi-automatic version keeps the operator in the cycle and is normally chosen where the material mix changes frequently.
The baler itself measures 14,000 x 2,000 mm (length x width). Allow additional space for the conveyor, bale discharge and forklift access when planning the layout.
An EU Verification of Conformity (DPWD/09/060/2024, valid to 18 September 2029) and a UDEM Machinery Directive attestation (EASY03220201M, valid to 21 March 2027) are on file for the product line.
Send your material type, dimensions, loose density, target bale size or weight, available space, power supply and required throughput, and we will confirm the model and options.
Contact: Nick | Email: Sales@nkbaler.com | Tel / WhatsApp: +86 15021631102
Shaanxi Nick Machinery Equipment Co., Ltd. - Qun Sheng Lu, Hui Shan Qu, WuXi Shi, Jiang Su Sheng, China | www.nkbaler.com
nkw180bd-horizontal-hydraulic-baler-overview.png - NKW180BD horizontal hydraulic baler machine overview
nkw180bd-baling-press-side-view.png - NKW180BD baling press side view showing feed opening
nkw180bd-machine-detail-view.png - NKW180BD hydraulic baler detail view of the pressing structure