{{ variable.name }}
SEO Title: HOWO 4x2 12-18T Dump Truck 300HP Light Duty Tipper | ELORRY
Meta Description: Source a HOWO 4x2 12-18T dump truck with 300HP engine and 5-8 m³ body. Q235/Q345 steel, 45-55° tipping, Euro II-V options, 12-month warranty. Fast lead time.
URL Slug: howo-4x2-12-18t-dump-truck-300hp
The HOWO 4x2 12-18T dump truck is a light-duty tipper for construction material hauling, municipal works and small quarry cycles. Its 4x2 drive and 300HP engine (per model image) suit buyers who need a manoeuvrable truck with a 5-8 m³ cargo body. The Q235/Q345 steel body, 45-55° tipping angle and 15-25 s lifting time support daily aggregate, sand and spoil discharge. Emission options from Euro II to Euro V (Euro VI on request) help match local fuel sulfur levels and registration rules. Every unit receives static inspection, tipping test, load test and road test before shipment, and major components carry a 12-month warranty.
| Parameter | Specification |
|---|---|
| Drive configuration | 4x2 |
| Rated payload | 12-18 t (per model image) |
| Engine power | 300 hp (per model image) |
| Cargo body volume | Approx. 5-8 m³ (4x2 range) |
| Cargo body length | 3,500-4,500 mm |
| Body steel | Q235/Q345 high-strength steel; NM400/NM450 optional |
| Floor plate / side wall | 6-12 mm / 4-8 mm |
| Tipping angle | 45-55° |
| Lifting time / lowering time | 15-25 s / 10-20 s |
| Emission standard | Euro II, III, IV or V; Euro VI on request |
| Transmission | 6-12 forward speeds and 2 reverse; manual standard, AMT optional |
| Brakes | Dual-circuit air brake, spring parking brake, engine exhaust brake, ABS optional |
| Tires | 8.25R16-12.00R20, tubeless optional |
| Fuel tank | 150-400 L with lockable cap |
| Maximum speed | 75-100 km/h |
| Cab capacity | 2-3 persons; day cab or sleeper cab |
| Warranty | 12 months for major components |
| Lead time | About 30 days for orders under 20 units; stock models ship faster |
The 4x2 light-duty tipper can be specified with a day cab or sleeper cab, air conditioner, reversing camera, GPS tracker, central locking and sun visor. Safety options include ABS, ESC, tire pressure monitoring and front underrun protection. Body options cover a dust suppression water tank, tarpaulin cover, insulation layer and side-tipping gate. Buyers can choose left-hand drive or right-hand drive, custom RAL paint, company logo and fleet markings. Spare parts such as filters, brake pads, clutch plates and tires can be shipped in the same order.
4x212-18T300HP5-8 m³Euro II-V
The dump body and dump box use Q235/Q345 high-strength structural steel, with NM400/NM450 wear-resistant steel available for abrasive service. The floor plate is 6-12 mm and the side wall is 4-8 mm, with a reinforced front wall. The chassis is carbon structural steel with reinforced cross members and gussets. The cab is a welded steel body with tempered glass. The hydraulic system uses hard-chrome-plated telescopic cylinders and high-pressure hoses. The fuel tank is steel or aluminum alloy, and tires are radial steel-belted.
This 4x2 tipper is used for construction and infrastructure works, municipal engineering, sand and gravel yards, cement and concrete plants, real estate development, site levelling, waste and debris removal, agriculture, and road maintenance depots. It also suits rental fleets that need a smaller tipper for urban and semi-urban jobs. The 4x2 layout is best matched to paved or firm site roads where a lighter payload and tighter turning radius are more useful than maximum volume.
ELORRY confirms body volume, steel thickness, lifting system, axle layout, emission level, tire size, cab trim and paint against drawings and photos before production. Customers can request a cold package with fuel heater, engine preheater, cab heater and winter-grade lubricants, or a fleet package with the same paint, same specification and sequential unit numbers. Left-hand drive, right-hand drive and mixed-fleet orders are accepted. Spare-parts kits and an English manual are included with pre-delivery fluid check, tire pressure check and battery charge.
A: The model image identifies a 12-18 t rated payload. The exact figure is confirmed on the order drawing before production.
A: Euro II, Euro III, Euro IV and Euro V are available, with Euro VI on request. The selection can be matched to local fuel sulfur levels and registration rules.
A: Yes. Body volume, steel thickness and wear-resistant steel options are agreed before production. NM400/NM450 is available for abrasive loads.
A: Each unit receives static inspection, tipping test, load test and road test. Progress photos can be shared with the buyer.
A: For orders under 20 units, the typical lead time is about 30 days. Stock models ship faster.
A: Yes. Left-hand drive, right-hand drive and mixed-fleet orders are supported.
For configuration advice, pricing and shipping options, contact ELORRY: Tel +86-13083602803, WhatsApp +86-16638078903, Email info@elorry-ind.com. Address: Zhengzhou City, Henan Province, China. The service pledge includes a 15-minute response and a 24-hour hotline.