{{ variable.name }}
Spherical high carbon cast steel shot in the medium hardness grade, supplied in twelve graded sizes from S70 to S930 for blast cleaning, scale removal and surface profiling before coating.
Cast steel shot is a spherical metallic abrasive cast from high carbon steel, heat treated and screened to graded sizes. This HRC 40-50 grade is the medium hardness option in the Cast Steel Shot S70-S930 series: twelve graded sizes, 7.8 g/cm³ specific gravity, 4.5-4.8 g/cm³ bulk density and more than 1000 recyclable cycles.
The grade balances impact energy with toughness, which suits general blast cleaning, mill scale and rust removal, paint stripping and surface profiling before painting. Rounded particles keep surface profiles smooth and reduce wear on blast wheels and other wearing parts.
Hardness is held in the HRC 40-50 band, and consistent hardness batch after batch keeps cleaning cycles repeatable at the same machine setting.
Round shot produces a smooth, rounded surface profile and reduces wear on blast wheels compared with angular abrasives.
Long service life lowers abrasive consumption for every tonne of steel cleaned and reduces replenishment frequency.
Less dust inside the booth improves operator visibility and eases the load on dust collection and fume extraction systems.
Size designations follow recognised SAE grading so blasting teams can match shot to existing separators and wheel settings.
High particle density carries more kinetic energy per particle at the same wheel speed, shortening cleaning time.
| Property | Value |
|---|---|
| Material | High carbon cast steel |
| Hardness (this grade) | HRC 40-50 |
| Alternative grade | HRC 55-65 |
| Particle shape | Spherical |
| Size range | S70, S110, S170, S230, S280, S330, S390, S460, S550, S660, S780, S930 |
| Specific gravity | 7.8 g/cm³ |
| Bulk density | 4.5-4.8 g/cm³ |
| Recyclable cycles | 1000+ |
| Grading standard | SAE J441 / J827 |
| Test report standards | JB/T8354-1996, YB/T5150-93, GB/T88.3 |
| Quality system | ISO9001 |
Twelve size designations are produced in this series. Each size is available in the HRC 40-50 grade shown here or in the HRC 55-65 grade.
Size selection can be matched to the customer blasting machine and separator setting as a customized grade.
Particles are melted from high carbon cast steel in medium-frequency induction furnaces, formed by centrifugal atomization granulation, then quenched and tempered, rounded and screened. Every batch is tested for chemical composition and fatigue life, with pre-shipment sampling inspection. MTC test reports are issued against JB/T8354-1996, YB/T5150-93 and GB/T88.3 for EU, US and Middle East shipments.
Supplied for shipbuilding and ship repair, steel structure and bridge fabrication, foundries, automotive parts and spring peening, pipeline and tube, and rail and locomotive work.
Grades can be customized to suit a specific blasting machine and separator, and customized solutions are available for different blasting applications. The plant operates on 20,000 m² with an annual production capacity of approximately 100,000 tons and 15 engineers, which supports consistent supply for long-term programmes.
A five-year supply programme covers shipbuilding and ship repair companies, structural steel and bridge fabricators, automotive parts and surface treatment plants, foundries, abrasive distributors and equipment integrators across AR, ES, FR, GB, IR, KR, MY, PK, PT, SA, TH, US and VN.
Both grades are produced in the same size range from S70 to S930. The HRC 40-50 grade is the medium hardness option for general cleaning and descaling; the HRC 55-65 grade is used where higher hardness is required for shot peening and surface strengthening.
Twelve sizes: S70, S110, S170, S230, S280, S330, S390, S460, S550, S660, S780 and S930.
Yes. The shot is used in shot blasting machines, tumble blast machines, sand blasting pots, blast cabinets and blast rooms, together with abrasive recovery and dust collection systems.
Each batch is tested for chemical composition and fatigue life, followed by pre-shipment sampling inspection. MTC test reports are available with the shipment.
Keep the material dry to prevent caking, and keep it away from moisture in the blasting area.
Yes. Grades can be customized to match a specific blasting machine and separator configuration.
Send your workpiece material, target surface grade, machine type and required size so the grade can be quoted accordingly.