{{ variable.name }}
Spherical cast steel shot used as a dense, free-flowing weighting medium for counterweight blocks, mold box filling and anti-floating ballast.
Cast steel shot is a spherical particle made from high carbon cast steel with a specific gravity of 7.8 g/cm³ and a bulk density of 4.5-4.8 g/cm³. Outside blasting, the same material is used as a dense weighting medium where a high weight per unit volume is needed inside a fixed cavity.
Typical weighting uses reported by the supplier include high density weighting sand for elevator counterweights, anti-floating heavy aggregate for construction, counterweight block raw material for construction machinery, and molding sand for foundry box filling and mold weighting. Because the particles are spherical and screened, the material flows into cavities and fills voids predictably.
High specific gravity means a compact counterweight cavity can reach the target mass with less material height.
Bulk density of 4.5-4.8 tonnes per cubic metre makes filling volume easy to calculate for counterweight blocks.
Rounded particles fill narrow cavities and settle evenly instead of bridging like irregular or flaky fillers.
Low dust keeps the filling area cleaner and reduces exposure during counterweight and mold box handling.
Graded sizes from S70 to S930 keep the fill behaviour repeatable from one batch to the next.
Rated for 1000+ recyclable cycles, the shot can be recovered and reused when a weighted assembly is opened.
| Property | Value |
|---|---|
| Material | High carbon cast steel |
| Particle shape | Spherical |
| Specific gravity | 7.8 g/cm³ |
| Bulk density | 4.5-4.8 g/cm³ (approx. 4.5-4.8 t/m³) |
| Size range | S70, S110, S170, S230, S280, S330, S390, S460, S550, S660, S780, S930 |
| Hardness options | HRC 40-50 or HRC 55-65 |
| Recyclable cycles | 1000+ |
| Grading standard | SAE J441 / J827 |
| Test report standards | JB/T8354-1996, YB/T5150-93, GB/T88.3 |
| Quality system | ISO9001 |
Any of the twelve graded sizes can be supplied for weighting use, and the hardness grade does not affect the density figures above.
Size selection for filling work is confirmed against the cavity opening and required flow behaviour.
The shot is melted from high carbon cast steel in medium-frequency induction furnaces, granulated by centrifugal atomization, then quenched, tempered, rounded and screened. The rounded form is what allows the material to flow into cavities, while screening keeps each size band consistent.
Each batch is tested for chemical composition and fatigue life and inspected by pre-shipment sampling, with MTC test reports issued against JB/T8354-1996, YB/T5150-93 and GB/T88.3.
Grades can be customized to suit the application, and customized solutions are available for different end uses. Production capacity of approximately 100,000 tons per year on a 20,000 m² site supports bulk weighting programmes alongside abrasive supply.
Weighting and filling uses are part of a five-year supply programme covering elevator counterweight manufacturers, construction machinery and forklift manufacturers, construction anti-floating engineering contractors and foundries, with shipments to AR, ES, FR, GB, IR, KR, MY, PK, PT, SA, TH, US and VN.
Yes. High density weighting sand for elevator counterweights and counterweight block raw material for construction machinery are among the applications reported by the supplier.
Bulk density is 4.5-4.8 g/cm³, which is approximately 4.5-4.8 tonnes per cubic metre of filled volume.
Spherical graded particles flow into cavities and settle evenly, and the material generates low dust during handling.
Yes. Foundry box-filling sand for mold weighting and box embedding is listed among the applications.
Twelve sizes from S70 to S930, with the size confirmed against the cavity opening and required flow.
MTC test reports against JB/T8354-1996, YB/T5150-93 and GB/T88.3, plus chemical composition and fatigue life testing of each batch.
Share the cavity volume, target mass and filling method so the most suitable size band can be recommended.