Menu

Hook Lift Garbage Truck 3-20 m3 Container Handling for Transfer Stations

Quantity:
SKU: 3549697252
Model: GarbageTruck

{{ variable.name }}

{{ value.name }}
SEO Title: Hook Lift Garbage Truck 3-20 m3 Container Handling for Transfer Stations | Meta Description: Hook lift garbage truck for 3-20 m3 containers with hydraulic hook arm, 4x2 or 6x4 chassis and fast container exchange for transfer work. | URL Slug: /hook-lift-3-20m3

Hook Lift Garbage Truck 3-20 m3 Container Handling for Transfer Stations

Container-exchange refuse truck for urban and rural collection, transfer stations and site cleanup.

Hook lift garbage truck with container handling arm
Hook lift body for container exchange
Hook lift truck chassis and hydraulic system
Hydraulic system and chassis layout
Hook lift garbage truck container handling detail
Container handling detail

Product Summary

This hook lift garbage truck is built around container exchange rather than compaction. It handles 3-20 m3 hooklift containers on 4x2 or 6x4 chassis, with payload covering 3,000-18,000 kg. A high-strength hook arm and hydraulic system allow fast container exchange for urban and rural waste collection, transfer stations, construction debris and industrial sites. The chassis can be supplied with left-hand or right-hand drive and 90-300 hp diesel engines.

Key Features

3-20 m3 container range

One truck can work with multiple container types and sizes.

Fast container exchange

The hook arm replaces manual handling and shortens collection time.

4x2 or 6x4 chassis

Payload from 3,000-18,000 kg and GVW from 4,500-26,000 kg.

18-21 MPa hydraulics

Gear pump, hard chrome-plated rods and imported seal kits.

Site equipment matching

Container handling can be matched to loaders and yard equipment.

LHD or RHD and 90-300 hp

Engines cover Euro II to Euro V for different fuel markets.

Technical Specifications

ParameterSpecification
Body typeHook-lift
Container range3-20 m3
Drive4x2 or 6x4
Payload3,000-18,000 kg
GVW range4,500-26,000 kg
Hydraulic pressure18-21 MPa
Hydraulic tank60-120 L with return filter and oil cooler
ControlManual multi-way valve standard; joystick optional
EngineDiesel 90-300 hp, Euro II to Euro V
Cab2-3 persons, LHD or RHD
Working temperatureMinus 20 to plus 50 degrees C

Models and Options

Hook-lift is one of six body types available alongside rear-loader compactor, front-loader, side-loader, swing-arm and skip-loader. Body capacity across the range is 3-20 m3. The hook-lift unit can be quoted on 4x2 for 3,000-8,000 kg payload or 6x4 for 10,000-18,000 kg payload.

  • Options include bin washing and disinfection, weighing system, GPS telematics and side loading door.
  • Manual multi-way valve is standard; electro-hydraulic joystick in the cab is optional.
  • Air suspension and cold-start or tropical cooling packages are available.

Materials and Structure

The hook-lift body uses Q235/Q345 carbon steel, with a sub-frame of Q235 channel bolted to the chassis rails. Hydraulic cylinders use 45# steel barrels, hard chrome-plated piston rods and imported seal kits. Hydraulic piping is high-pressure rubber hose with steel fittings and steel tube lines on the chassis. The pump and valves are cast iron gear pump and multi-way valve. Body finish is shot-blasted, epoxy primer and polyurethane topcoat.

Applications

Urban and rural waste collection with fast container exchange, transfer stations, construction and demolition debris, industrial plant housekeeping, factory scrap handling, site clearance, disaster relief and post-flood cleanup, and municipal sanitation where one truck must serve multiple container points.

Customization

Container handling can be matched to the site equipment and container types used by the customer. Axle layout, body volume and hydraulic controls are fixed around payload, route and tipping point. LHD or RHD, air suspension, cold-start package or tropical cooling are available. Lead time is about 25-40 working days from down payment. Trade terms are FOB, CIF or DAP.

Case Study

A Peru municipal sanitation department and waste management contractor received one batch of hook-loader type garbage trucks, shipped in June 2026. After about 5 months in service, the operator reported higher collection efficiency and lower labour input. The high-strength hook arm is compatible with multiple container types, with easy maintenance and a durable chassis.

FAQ

Q: Does this hook lift truck compact waste?

A: No. The hook lift is a container-exchange body. For compaction, choose a rear-loader compactor model.

Q: What container sizes can it handle?

A: The range covers 3-20 m3 containers, and the hook arm can be matched to the container types used on site.

Q: What chassis options are available?

A: 4x2 for 3,000-8,000 kg payload and 6x4 for 10,000-18,000 kg payload, with LHD or RHD.

Q: What hydraulic pressure does it use?

A: The gear pump system works at 18-21 MPa with hard chrome-plated piston rods and imported seals.

Q: Can it work in hot climates?

A: The working temperature range is minus 20 to plus 50 degrees C with tropical cooling or cold-start package.

Q: What is the lead time?

A: About 25-40 working days from down payment.

Inquiry Information

Henan Elorry Industrial Co., LTD. | Tel: +86-13083602803 | WhatsApp: +86-16638078903 | Email: info@elorry-ind.com | Address: Zhengzhou City, Henan Province, China

Image Filename and Alt Suggestions

  • hook-lift-3-20m3-container-arm.png - alt: hook lift garbage truck with container handling arm
  • hook-lift-3-20m3-hydraulic-chassis.png - alt: hook lift truck chassis and hydraulic system
  • hook-lift-3-20m3-container-detail.png - alt: container handling detail on a hook lift garbage truck