{{ variable.name }}
A single screw loss-in-weight feeder configured for intermittent batch metering of granules, glass fibers, crushed materials, granule-powder mixtures and free-flowing powders.

The TG-LW-SS80 series single screw loss-in-weight feeder is applied to two production conditions: continuous loss-in-weight metering and intermittent loss-in-weight batch metering. This page covers the batch configuration, in which successive batches are weighed out instead of holding one constant feed rate over the run.
Material is held in a 60 L metering bin as standard, with a 120 L bin available, and flows through a 15 L U-shaped hopper into the single screw. Product-contact parts are SS304 and the screw is driven by a 1 kW, 380 V servo motor. Operation is automatic under weighing sensor control. Models TG-LW-SS80U, TG-LW-SS80P and TG-LW-SS80LP are all listed in CE verification of conformity ICR/VC/HFG260828.
Configured for intermittent loss-in-weight batch metering, where each recipe component is weighed out in sequence rather than fed continuously.
Operation is automatic under weighing sensor control, which keeps batch weighing repeatable across shifts without manual intervention.
Bin, hopper and material-contact parts are SS304, which simplifies cleaning between recipes and suits chemical and food ingredients.
The 60 L metering bin is standard and a 120 L bin is available, so batch size can be matched to the bin volume of the line.
A 1 kW, 380 V servo motor drives the single screw, the standard drive for this feeder model.
CE verification of conformity ICR/VC/HFG260828 valid to 19 August 2031; factory certified to ISO 9001:2015 and ISO 14001:2015.
| Model configurations | TG-LW-SS80U / TG-LW-SS80P / TG-LW-SS80LP |
|---|---|
| Feeder type | Single screw loss-in-weight feeder |
| Metering bin | 60 L / 120 L |
| U-shaped hopper | 15 L |
| Material in contact with product | SS304 |
| Servo motor | 1 kW, 380 V |
| Soft connection | Cloth cover / silicone rubber |
| Ambient temperature | 0-40 °C |
| Material temperature | 0-50 °C |
| Paint color | RAL 5003 |
| Operation mode | Automatic operation, weighing sensor control |
| Operating conditions | Intermittent loss-in-weight batch metering; continuous loss-in-weight metering also supported |
| Electrical explosion-proof | Optional |
| CE certification | ICR/VC/HFG260828 - EN ISO 12100:2010, EN 60204-1:2018+A1:2025, EN IEC 61000-6-2:2019, EN IEC 61000-6-4:2019, valid to 2031-08-19 |
| Factory system certificates | ISO 9001:2015 (38524UQN0DP2R0S); ISO 14001:2015 (38524UE640TRR0S) |
These are the standard parameters for this single feeder. For other configurations, review the wider loss-in-weight feeder range or contact the manufacturer with custom requirements.
All parts in contact with the material are SS304. The metering bin discharges through a 15 L U-shaped hopper into the single screw, with a soft connection supplied as a cloth cover or in silicone rubber between bin and body. The frame is painted RAL 5003. Screws, barrels, sheet-metal parts, controllers and HMIs are designed and produced in house, with proprietary control software.
Batch metering is used for automatic food batching, for metering color-masterbatch and modified-plastics ingredients, and for ratio control in chemical and building-material processes. The feeder handles granules, glass fibers, crushed materials, granule-powder mixtures and powders with good flowability.
A reference project serving plastics compounding companies, food producers, chemical companies and users of other production lines reported automated batching, more stable formula control and improved production efficiency after commissioning. The project has been running for one year and includes automatic food batching and metering of color-masterbatch and modified-plastics ingredients.
The feeder supports two production conditions: continuous loss-in-weight metering and intermittent loss-in-weight batch metering. In batch mode successive quantities are weighed out; in continuous mode a steady feed rate is maintained. This page covers the batch configuration.
Operation is automatic under weighing sensor control.
TG-LW-SS80U, TG-LW-SS80P and TG-LW-SS80LP, all listed in CE verification of conformity ICR/VC/HFG260828 valid to 19 August 2031, against EN ISO 12100:2010, EN 60204-1:2018+A1:2025 and the EMC standards EN IEC 61000-6-2:2019 and EN IEC 61000-6-4:2019.
A 60 L metering bin as standard with a 120 L option, and a 15 L U-shaped hopper feeding the single screw.
Yes. The feeder has been engineered for outdoor installation, high humidity, dust and a -10 °C to 50 °C working range. The standard build is rated 0-40 °C ambient and 0-50 °C material temperature.
An optional electrical explosion-proof function is available, and other special requirements are handled through customized design.
Yes, a cloud management platform is available for remote monitoring of feeding rate, weight data, equipment status and alarm information.
Transcell Intelligent Machinery (Changzhou) Co., Ltd.
Address: Building 9, No.9 Caoxi Road, Niutang Town, Wujin District, Changzhou City, Jiangsu Province, China
Email: info@transcellgroup.com | Tel: +86 400-068-3777 | WhatsApp: +852 6952 8737
Website: www.transcellgroup.com
Tell us your batch size, recipe components and cycle time so the metering bin size and batch configuration can be confirmed for your line.
SEO Title: Intermittent Batch Loss-in-Weight Feeder for Automatic Batching
Meta Description: SS304 loss-in-weight feeder for intermittent batch metering and automatic batching of granules, fibers and powders. 60L or 120L bin, 1 kW servo, CE certified.
URL Slug: batch-loss-in-weight-feeder
Image file and alt suggestions:
loss-in-weight-feeder-tg-lw-ss80-batch-front.png - TG-LW-SS80 batch loss-in-weight feeder shown from the front with SS304 metering bin
loss-in-weight-feeder-tg-lw-ss80-batch-hopper.png - 15 L U-shaped hopper and single screw feeding a batch weighing cycle
loss-in-weight-feeder-tg-lw-ss80-batch-servo.png - 1 kW 380 V servo motor on the batch metering feeder