Menu

Lightweight 74 kg Screw Airend for Electric Bus Brake and Suspension Air

Quantity:
SKU: 4267991987
Model: GCU33

{{ variable.name }}

{{ value.name }}

Lightweight 74 kg Screw Airend for Electric Bus Brake and Suspension Air

GCU33 integrated screw airend for battery-electric buses and heavy trucks — 74 kg, ≤75 dB(A), 540 V motor option, 5–12.5 bar, 2.3–3.9 m³/min at 7 bar.

74 kg Net WeightNoise ≤75 dB(A)540 V Motor Option9-in-1 Integrated

SEO TitleGCU33 Lightweight Screw Airend for Electric Bus Brake and Suspension Air

Meta DescriptionGCU33 screw airend for electric buses and heavy trucks: 74 kg, ≤75 dB(A), 540 V motor option, 15–30 kW, 2.3–3.9 m³/min at 7 bar, 9-in-1 integrated layout.

URL Slug/products/gcu33-screw-airend-electric-bus-air-system

H1Lightweight 74 kg Screw Airend for Electric Bus Brake and Suspension Air

Product Summary

Battery-electric buses and trucks place a hard energy budget on every auxiliary system. The GCU33 integrated screw airend addresses that constraint with a 74 kg net weight and a 477 × 438 × 633 mm envelope excluding the air filter assembly, leaving bay space and payload for the traction package while supplying brake, door actuation and air suspension circuits.

The 9-in-1 configuration ships the screw airend, an oil-gas separator tank with built-in coarse separator, three filters and four valves as one assembly, so the vehicle builder connects a single unit instead of plumbing a loose component set. Delivery is 2.3–3.9 m³/min at 7 bar across a 5–12.5 bar working range at 15–30 kW and 3100–6000 rpm, noise is held at or below 75 dB(A), and a 540 V motor option is available for high-voltage architectures.

GCU33 lightweight integrated screw airend for electric bus air systems, front view
GCU33 9-in-1 screw airend valve and filter group for electric vehicle installation

Key Features

74 kg Net Weight

A compact 477 × 438 × 633 mm body reduces the mass and bay volume added to a battery-electric chassis.

Noise ≤75 dB(A)

Low noise output suits passenger areas where the electric driveline no longer masks auxiliary equipment.

540 V Motor Option

An electrical configuration matched to high-voltage electric bus architecture, with 24 V also referenced for electric vehicle air systems.

On-Demand Duty Cycle

The unit is specified for intermittent start-stop supply synchronised with brake, door and suspension demand instead of continuous running.

9-in-1 Integration

Airend, separator tank, three filters and four valves in one assembly: fewer parts to package and fewer leak paths on a crowded chassis.

Anti-Emulsification Patent

Patented method for preventing oil emulsification in vehicle screw air compressors (ZL2025 1 1888313X) supports humid and dusty duty.

Technical Specifications

ModelGCU33
TypeWide-range integrated screw airend; vehicle / general purpose
Power15–30 kW
Speed3100–6000 rpm
FAD at 7 bar2.3–3.9 m³/min
Working pressure5–12.5 bar (max. 12.5 bar / min. 5 bar)
Max. discharge temperature105 °C
Oil carry-over<2 ppm (design ≤3 ppm)
Noise≤75 dB(A)
Net weight74 kg
Dimensions (L×W×H)477 × 438 × 633 mm, excluding air filter assembly
Motor option540 V for high-voltage electric bus architecture; 24 V also referenced for electric vehicle air systems
Integrated configuration9-in-1: screw airend + oil-gas separator tank (built-in coarse separator) + 3 filters (external fine oil separator, oil filter, air filter optional) + 4 valves (intake control valve, minimum pressure valve, thermostat valve, safety valve)
Rotors / bearings / sealForged alloy steel rotors with German-designed UV patented profile; SKF heavy-duty rolling bearings; triple-sealing technology
ComplianceCE (TUV Rheinland, CE-WSD-GCU-2023-001, valid to 2028-06-14); ISO 9001:2015; IATF 16949:2016

Models and Options

  • Motor voltage — 540 V option for high-voltage electric bus architecture; 24 V referenced for electric vehicle air systems.
  • Architecture — conventional airend or 9-in-1 integrated unit available from one source.
  • Air filter — included in the package or specified as optional by the installer.
  • Housing — high-grade cast iron as standard; aluminium-alloy housing under development.
  • Mounting — standardised interface with technical drawings for chassis integration.

Materials and Structure

Forged alloy steel rotors carry a German-designed UV patented profile (patent ZL2012 1 0087353.0) produced through more than 20 precision machining steps to micron accuracy, supported by SKF heavy-duty rolling bearings and triple-sealing shaft technology. Oil is separated in a built-in coarse separator inside the oil-gas tank and then in an oversized external fine separator, keeping carry-over below 2 ppm with a design limit of 3 ppm. The sealed integrated cast iron housing encloses the airend and the factory-fitted valve group, with the thermostat valve regulating oil temperature up to a maximum discharge temperature of 105 °C.

Applications

Built for new energy commercial vehicle air systems: electric bus, electric heavy truck and electric mining truck platforms.

  • Service braking and parking brake air supply.
  • Pneumatic door actuation and air suspension control.
  • Ride-height adjustment used to protect battery-pack ground clearance.
  • Operation in humid and dusty road conditions with frequent start-stop cycles, matched with motor controller, air dryer and DC-AC inverter.

Customization

Motor voltage, mounting interface, air filter arrangement and the choice between conventional and 9-in-1 architecture are agreed per vehicle platform, with technical drawings issued for chassis integration. Because the airend is one element of the vehicle air system, the specification is normally fixed together with the air dryer, valve block and reservoir layout rather than in isolation.

Case Study

New Energy Vehicle OEM (BYD class)Electric Bus Air System

Approx. 1,500 units per year over 3 years for electric bus braking, door actuation and air suspension. Result reported by the customer: lightweight and low energy consumption, meeting the strict energy budget of electric buses. Highlights: 35% volume reduction, low noise ≤75 dB(A), 540 V motor option.

FAQ

How much weight does the airend add to an electric chassis?

Net weight is 74 kg, and the envelope is 477 × 438 × 633 mm excluding the air filter assembly.

Is a high-voltage motor configuration available?

A 540 V motor option is referenced for electric bus architecture; 24 V is also referenced for electric vehicle air systems. The final configuration is agreed per platform.

What duty cycle is it specified for?

On-demand intermittent start-stop supply synchronised with brake, door and suspension demand, rather than continuous running.

What output can the unit deliver?

2.3–3.9 m³/min FAD at 7 bar, within a 5–12.5 bar working range at 15–30 kW and 3100–6000 rpm, with maximum discharge temperature of 105 °C.

How is oil carry-over controlled?

A built-in coarse separator plus an oversized external fine separator, combined with triple shaft sealing, keeps carry-over below 2 ppm against a design limit of 3 ppm.

Which quality and market certifications are held?

CE issued by TUV Rheinland (CE-WSD-GCU-2023-001, valid to 14 June 2028), ISO 9001:2015 and IATF 16949:2016 automotive quality management.

Inquiry Information

Wuxi Woyo Superdo Compressor Co., Ltd. (brand WOLXAIR), founded 1996, 20,000 m² facility, 120+ staff, 12,000 units annual output.

Email: service@woyo.cn · Tel: +86 510 8599 6655 · WhatsApp / Mobile: +86 189 1237 9878

Address: No.5 Changkang Road, Mashan, Binhu District, Wuxi, Jiangsu, China · www.woyocomp.com

Please advise motor voltage, required FAD and pressure, chassis envelope and annual volume so a configuration-specific quotation can be prepared. MOQ, price and delivery are confirmed per configuration.

Image Filename and Alt Suggestions

  • gcu33-screw-airend-ev-bus-front.png — alt: GCU33 lightweight integrated screw airend for electric bus air systems, front view
  • gcu33-screw-airend-ev-valve-group.png — alt: GCU33 9-in-1 screw airend valve and filter group for electric vehicle installation
  • gcu33-screw-airend-ev-mounting-base.png — alt: GCU33 screw airend mounting base and ports for chassis integration
  • gcu33-screw-airend-ev-compact-side.png — alt: GCU33 compact screw airend body showing integrated separator tank, side view