{{ variable.name }}

Recycling workshops handle material that arrives loose, mixed and dusty: waste paper, plastics, scrap metal, textiles, agricultural straw and mixed solid waste. The NKB220 compresses that material into 480 × 480 mm bags, 220-350 mm high, at 30-35 kg per bag, 90 bales per hour and 2.5-3 t/h. The press works at 21 MPa against a 200 t force with a 22-second cycle and accepts material through a 700 × 480 mm feed opening, with a 13% moisture limit. The carbon steel frame weighs 6 t, measures 4260 × 1100 × 1800 mm and runs on a 40 HP motor with 200-480 V, 50 Hz, three-phase supply. The design brief for this duty calls for low noise, low energy consumption and high efficiency.
The press is specified with a low-noise design brief, which makes it practical to install inside a workshop instead of a separate enclosure.
Waste paper, plastics, scrap metal, textiles, agricultural straw and mixed solid waste can all be compressed, so one press covers several waste streams.
Bag size and weight suit manual collection and standard transport, cutting the number of loose-material trips out of the yard.
At 2.5-3 t/h, loose volume is reduced in the same session it is received, which frees floor space instead of stockpiling it.
The machine is planned alongside conveyors, shredders, crushers, baling wire, PET strapping and jumbo bags rather than bought in isolation.
One specification fits a wide range of workshop power supplies, which keeps spare-part and service planning simple across sites.
| Parameter | Value |
|---|---|
| Model | NKB220 |
| Pressing force | 200 t |
| Working pressure | 21 MPa |
| Bale size (L × W × H) | 480 × 480 × (220-350) mm |
| Bale weight | 30-35 kg per bag |
| Compress time | 22 s |
| Bale capacity | 90 bales/h |
| Throughput | 2.5-3 t/h |
| Feed opening (L × H) | 700 × 480 mm |
| Moisture requirement | 13% or under |
| Motor power | 40 HP |
| Voltage | 200-480 V / 50 Hz / 3 phase |
| Machine size (L × W × H) | 4260 × 1100 × 1800 mm |
| Machine weight | 6 t |
| Frame material | Carbon steel |
Bale height is adjustable across 220-350 mm and the electrical arrangement is fixed within the 200-480 V range. Workshop projects are matched with conveyors, hydraulic components, baling wire, PET strapping, jumbo bags, packing tools, shredders and crushers, and can be supplied as a single machine or as part of a complete-line project.
A carbon steel frame of 6 t holds the 200 t / 21 MPa press steady through continuous cycling of dense or abrasive waste streams. The 480 × 480 mm chamber, 700 × 480 mm feed opening and 4260 × 1100 × 1800 mm footprint are planned for workshop layouts where material arrives by conveyor or wheel loader.
Waste paper, plastics, scrap metal, textiles, agricultural straw and mixed solid-waste recycling. Project types include recycling-facility upgrades, new recycling plants, small processing workshops, and warehouse or industrial waste management. The recorded working condition is an indoor recycling workshop at -10 °C to 45 °C, normal humidity, light dust and a stable three-phase power supply.
Because waste streams vary widely, the bale parameters are set from the material brief: material type, dimensions, loose density, target bale weight or size, available space, power conditions, automation level and required throughput.
Pakistan — agricultural manufacturer, 1 unit. One NKB220 unit was supplied for baling straw and alfalfa. Reported results are stable operation in daily use, a low-noise running profile, and an expected service life of 10-15 years under normal maintenance conditions.
Yes. The applicable material range covers waste paper, plastics, scrap metal, textiles, agricultural straw and mixed solid waste, provided moisture is at 13% or below.
The design brief for this duty specifies low noise, and low noise operation is also reported from the Pakistan installation.
An indoor recycling workshop between -10 °C and 45 °C with normal humidity, light dust and a stable three-phase supply.
Not always, thanks to the 700 × 480 mm feed opening, but shredders and crushers are available as matched upstream equipment for oversized material.
Baling wire, PET strapping and jumbo bags are the matched consumables for tying and containing the finished bags.
90 bales per hour at 30-35 kg per bag, equivalent to 2.5-3 t/h with a 22-second compress cycle.
Describe your waste streams and yard layout to Sales@nkbaler.com or WhatsApp +86 15021631102 and the bale configuration will be matched to it.
Address: Qun Sheng Lu, Hui Shan Qu, WuXi Shi, Jiang Su Sheng, China. Website: www.nkbaler.com