{{ variable.name }}
SLT series · continuous heavy-duty duty · 100% oil-free · air, nitrogen and oxygen-enriched gas
SLT centrifugal turbo compressor — oil-free air supply for air separation trains
Air separation trains need large volumes of clean, oil-free feed air, and the duty rarely stops. The SLT centrifugal turbo air compressor is configured for exactly that role: a 100% oil-free compression path, high flow across the 70–4000 m³/min series range, and discharge pressure from 2.1 to 12.5 barg depending on model. Units are built for continuous operation in industrial or outdoor environments, including high-altitude and coastal sites, where corrosion resistance matters. Final flow and pressure are fixed per model and configuration.
The compression path carries no oil, so the air delivered downstream stays oil-free — the baseline requirement for air separation and gas generation systems.
The series covers 70–4000 m³/min, which lets a single frame feed large separation trains without splitting the duty across several smaller machines.
Semi-open 3D impellers designed in NREC software, with backward-swept blades and a low-solidity airfoil diffuser, keep stage efficiency high over a wider operating range.
Every impeller, gearbox and rotor is precision balanced and overspeed tested before shipment, so vibration stays well below standard requirements at continuous duty.
Titanium alloys and stainless steel are used for impellers and wetted parts, which suits coastal locations and humid operating conditions.
The control system calculates minimum load limits automatically and limits maximum load under variable conditions to protect the motor from overcurrent.
| Model series | SLT300, SLT800, SLT1250, SLT1800, SLT2500, SLT3700, SLT6000, SLT8000, SLT72000 |
|---|---|
| Flow rate | 70–4000 m³/min (series range) |
| Outlet pressure | 2.1–12.5 barg (series range) |
| Unit weight | 11.0–85.0 t (series range) |
| Gas media | Air, nitrogen, oxygen-enriched gas |
| Delivered air | 100% oil-free |
| Impeller and wetted material | Titanium alloys, stainless steel |
| Rotor dynamic balance | Grade below G1 |
| Operation mode | Continuous operation in industrial or outdoor environments |
| Compression stage | Single-stage or multi-stage, per duty point |
Frames run from SLT300 to SLT72000, with stage count and arrangement selected against the required flow and discharge pressure. Gas medium is fixed at ordering: air, nitrogen or oxygen-enriched gas. Small units are built as an integrated skid; large units use the split arrangement.
Impellers and wetted parts in titanium alloys or stainless steel, an in-house gearbox, and a rotor assembly balanced below G1 form the core. Because impellers and gearboxes are machined and tested in-house, quality consistency and delivery timelines stay under direct control.
Air separation unitsPSA nitrogen and oxygen generationAdsorption dryer feed airInstrument air for gas plantsHigh-altitude and coastal installations
Duty-point selection, stage count, skid or split arrangement, gas medium and wetted materials can all be specified. OEM and ODM support is available where project documentation and branding must follow a buyer template.
Oil carry-over contaminates downstream separation and gas-generation equipment. The SLT machine uses no oil in the compression path, so the delivered air stays oil-free.
Yes. The SLT series handles air, nitrogen and oxygen-enriched gas. Specify the gas composition and purity target when requesting a configuration.
Titanium alloys and stainless steel are available for impellers and wetted parts, and the series is built for industrial or outdoor environments including coastal locations.
Rotor assembly dynamic balance is below G1. Every impeller, gearbox and rotor is precision balanced and overspeed tested before shipment.
Typical matched equipment includes nitrogen and oxygen generators, adsorption dryers and precision filters as part of an on-site gas supply system.
An EC Declaration of Conformity for air compressors (ECM, no. 0P230209.SSE0Q23, valid to 2028-02-08) and ISO 14001 certification (NOA, no. 05126E00664R053, valid to 2029-03-26).
