{{ variable.name }}
SLT series · large-frame layout · 70–4000 m³/min · 2.1–12.5 barg · 100% oil-free
SLT centrifugal turbo compressor — large units use a split arrangement for transport and service access
The SLT multi-stage centrifugal turbo air compressor is the large-frame member of the series, supplied in a split arrangement where compressor, gearbox and driver sit in separate sections. That layout follows the physics of the machine: heavy frames are easier to transport, lift and service when the assembly is broken into modules rather than shipped as one skid. Series datasheet values are 70–4000 m³/min flow, 2.1–12.5 barg outlet pressure and unit weights up to 85.0 t; final figures are fixed per model and configuration.
The series covers single-stage and multi-stage configurations, so a duty point can be matched to the stage count instead of forcing one frame size onto every flow and pressure combination.
Large units are built as separate sections, which simplifies heavy transport, crane handling and access to bearings and seals during maintenance windows.
Semi-open 3D impellers designed in NREC software with backward-swept blades, a low-solidity airfoil diffuser and optimized volute tongue hold efficiency over a wider range.
Impeller, gearbox and rotor assemblies reach a dynamic balance grade below G1, with precision balancing and overspeed testing before shipment.
The control system calculates minimum load limits automatically and limits maximum load under variable conditions to protect the motor from overcurrent.
Core components are designed, machined and tested in-house, which keeps quality consistent and removes dependency on external supply chains.
| Model series | SLT300, SLT800, SLT1250, SLT1800, SLT2500, SLT3700, SLT6000, SLT8000, SLT72000 |
|---|---|
| Flow rate | 70–4000 m³/min (series range) |
| Outlet pressure | 2.1–12.5 barg (series range) |
| Unit weight | 11.0–85.0 t (series range) |
| Compression stage | Multi-stage configuration (single-stage also offered in the SLT series) |
| Arrangement | Split arrangement for large units; integrated skid for small units |
| Impeller and wetted material | Titanium alloys, stainless steel |
| Rotor dynamic balance | Grade below G1 |
| Delivered air | 100% oil-free |
| Gas media | Air, nitrogen, oxygen-enriched gas |
Frame sizes run from SLT300 and SLT800 through SLT6000, SLT8000 and SLT72000. Stage count and arrangement are selected together: small frames stay on an integrated skid, while large frames are delivered split. Gas medium can be fixed as air, nitrogen or oxygen-enriched gas at the ordering stage.
Titanium alloys and stainless steel are used for impellers and wetted parts. Structurally the machine is a geared centrifugal assembly: rotor with 3D impellers, in-house gearbox, and a split base carrying the modules. The compression path runs oil-free, and each rotor is balanced and overspeed tested before dispatch.
Iron, steel and metallurgyLarge air separation unitsPetrochemical and chemical processingPower generationCement and construction materials
Stage count, split or skid arrangement, gas medium and wetted materials can be specified per project. OEM and ODM support is available for buyers who need their own branding and documentation set.
Large SLT units are built in separate sections so they can be transported, lifted and serviced module by module. The integrated skid is used for small units.
The SLT series covers 70–4000 m³/min and 2.1–12.5 barg. Because values are model-specific, the duty point determines the frame and stage count.
Yes, the machine is specified for 100% oil-free air delivery, so no oil enters the compression path.
The series handles air, nitrogen and oxygen-enriched gas. Confirm gas composition and purity target at inquiry.
An EC Declaration of Conformity for air compressors (ECM, no. 0P230209.SSE0Q23, valid to 2028-02-08) and ISO 14001 certification (NOA, no. 05126E00664R053, valid to 2029-03-26).
