Road Sweeper Truck with Stainless Steel 304 Water Tank and Dust Bin
Product summary. A truck-mounted sweeper specified with stainless steel 304 for the water tank and the dust bin, for humid, salty or corrosive working conditions where a carbon steel body would corrode. The sweeping system stays the same: centre-mounted twin disc brushes, a wide floating vacuum nozzle and high-pressure spray bars, on a 4x2 or 6x4 chassis with water tank from 1 to 10 m3 and dust bin from 2 to 12 m3.
Road sweeper truck built with stainless steel 304 tank and dust bin for humid service.
Key Selling Points
Stainless steel 304 tank and binSelected where humidity or salt is a problem, so the water side and the wet debris side resist corrosion instead of being repainted every season.
4-6 mm wear-resistant bin floorThe dust bin floor and discharge door are built in wear-resistant steel, where abrasive grit and wet sand do the most damage.
EPDM sealing throughoutSynthetic rubber seals and skirts on tank covers, doors and the nozzle skirt keep water and fine dust inside the body.
Coated carbon steel structureRemaining Q235/Q345 steel parts are shot-blasted, epoxy-primed and polyurethane topcoated before assembly.
Hard chrome hydraulic rodsChrome-plated cylinder rods and high-pressure rubber hoses with steel fittings limit pitting in damp climates.
Brush choice for the debrisPolypropylene or nylon filament discs with replaceable segments and optional steel-wire tufts for heavy or wet debris.
Technical Specifications
| Item | Specification |
| Water tank material | Stainless steel 304 (carbon steel with anti-corrosion lining also available) |
| Dust bin material | Stainless steel 304; floor and discharge door in 4-6 mm wear-resistant steel |
| Structure and sub-frame | Q235/Q345 steel, 6-8 mm, bolted sub-frame, shot-blasted, epoxy-primed, polyurethane topcoated |
| Water tank / dust bin volume | 1-10 m3 / 2-12 m3, combined in one body |
| Seals and skirts | EPDM rubber on tank covers, doors and nozzle skirts |
| Suction nozzle | Q345 wear-resistant steel with replaceable rubber or polyurethane wear strips |
| Hydraulic system | Hard chrome-plated cylinder rods, high-pressure rubber hoses with steel fittings, gear or piston pump |
| Drive configuration | 4x2 at 7,000-10,000 kg GVW or 6x4 at 16,000-25,000 kg GVW |
| Sweeping width | 2.2-3.6 m adjustable; kerb brush on left, right or both sides |
| Working area | 20,000-90,000 m2/h depending on width and working speed |
| Sweeping efficiency | 95% or higher on a standard test surface |
| Maximum particle diameter | 100-150 mm at the suction nozzle |
| Working temperature range | -20 to +50 degrees C; tropical cooling or cold-start package available |
| Bin discharge | Rear tipping or rear door, 20-40 s per cycle |
Models and Options
The stainless steel build is quoted on 4x2 or 6x4 chassis with water tank from 1 to 10 m3 and dust bin from 2 to 12 m3. Sweeping width runs from 2.2 to 3.6 m with single-side or dual-side operation and a kerb brush on either or both sides. Engines from 85 to 250 kW in Euro II to Euro V, manual or automated manual transmission, left-hand or right-hand drive, and a fog cannon, separate washing boom, hand-held spray gun or drinking-water tank as specified options.
Materials and Structure
Stainless steel 304 is used for the water tank and the dust bin where humidity or salt shortens the life of coated carbon steel. The bin floor and discharge door are 4-6 mm wear-resistant steel, and the chassis frame and bolted sub-frame are Q235/Q345 steel at 6-8 mm, shot-blasted, epoxy-primed and polyurethane topcoated. The suction nozzle is Q345 wear-resistant steel with replaceable strips; EPDM rubber seals close the tank covers, doors and nozzle skirts, and hydraulic cylinder rods are hard chrome plated.
Applications
- Coastal cities and island markets with salt-laden air
- Port terminals and container yards
- Chemical parks and fertiliser or cement plants
- Food and beverage plants needing dust and spill control
- Humid tropical municipalities and equipment rental fleets
- Mining access roads and haul-road shoulders
Customization
Sales engineers confirm the climate and the debris first, then set tank material, tank volume, sweeping width, brush compound and chassis configuration. Left-hand or right-hand drive, emission level against local fuel quality, and a tropical cooling or cold-start package are fixed at quotation so the corrosion protection and the driveline match the destination.
FAQ
Which parts are actually stainless steel?The water tank and the dust bin. The bin floor and discharge door remain 4-6 mm wear-resistant steel for abrasion resistance, and the structure is coated Q235/Q345 steel.
When should I choose stainless steel instead of coated carbon steel?Where humidity or salt is a problem - coastal cities, ports and corrosive industrial sites are the cases named in the specification.
Does the stainless build change the sweeping performance?No. The brush, nozzle and fan layout is unchanged: sweeping width 2.2-3.6 m, maximum particle diameter 100-150 mm and 95 percent or higher sweeping efficiency on a standard test surface.
What protects the rest of the body?Shot blasting, epoxy primer and a polyurethane topcoat on all carbon steel parts, EPDM seals on covers, doors and skirts, and hard chrome-plated cylinder rods in the hydraulic system.
What is the delivery arrangement?About 25-40 working days from down payment, under FOB, CIF or DAP terms by RoRo or break-bulk, 1-4 units per shipment, with invoice, packing list, bill of lading, certificate of origin and insurance.
What does the warranty cover?12 months for major components; wear parts such as brushes, nozzle strips and seals are excluded. A spare-parts kit with brush segments, nozzle wear strips, hydraulic hoses, filters and spray nozzles ships with the order.
Inquiry Information
Tell us the climate, the salt or chemical exposure, the road type and the daily kilometres, and the tank material and coating specification are confirmed before quotation.
Tel +86-13083602803 | WhatsApp +86-16638078903 | Email info@elorry-ind.com
Supplier factory qualification assessed by SGS under the Alibaba Gold Plus Supplier Assessment Criteria, certificate 479886222_T, valid to 06 Nov 2026.
Image Filename and Alt Suggestions
- road-sweeper-truck-ss304-tank-body.png - road sweeper truck with stainless steel water tank and dust bin body panels
- road-sweeper-truck-ss304-bin-door.png - stainless steel dust bin discharge door and EPDM seal on the sweeper
- road-sweeper-truck-ss304-coastal-route.png - sweeper working a coastal route with spray bar active
SEO title: Stainless Steel Tank Road Sweeper Truck for Humid and Coastal SitesMeta description: Road sweeper truck with stainless steel 304 water tank and dust bin, 4-6 mm wear-resistant bin floor and EPDM seals for humid, salty and coastal service.URL slug: /stainless-steel-tank-road-sweeper-truckKeywords: stainless steel road sweeper truck, corrosion resistant sweeper truck, coastal street sweeper, ss304 tank sweeper