{{ variable.name }}

Weight-based dosing of pure water, white oil and similar liquids, in continuous or batch loss-in-weight metering.
The TG-LW-LF07N is the room-temperature build of the liquid loss-in-weight feeder, intended for liquids such as pure water and white oil that are metered without heat preservation. The 7 L metering bin, single liquid metering pump and tetrafluoro soft connection are the standard feed module, and the weighing sensor is available in 36 kg, 60 kg or 100 kg capacity. Feeding is automatic under weighing sensor control: the unit holds a set rate in continuous loss-in-weight metering or a set batch weight in intermittent loss-in-weight batch metering. Feed rate, weight data, equipment status and alarms can be reported to a cloud management platform.
| Parameter | Specification |
|---|---|
| Metering bin (standard) | 7 L |
| Drive motor | AC motor, 1 kW, 380 V |
| Liquid metering pump | Single pump |
| Soft connection | Tetrafluoro |
| Weighing sensor options | 36 kg / 60 kg / 100 kg |
| Weighing principle | Loss-in-weight (gravimetric) |
| Operation mode | Automatic, weighing sensor control |
| Heat preservation | Not applied in the N configuration |
| Monitoring | Cloud management platform for feed rate, weight data, equipment status and alarms |
| Material | SS304 |
| Ambient temperature range | -10 C to 50 C |
| Installation environment | Outdoor installation, high humidity, dust |
| Electrical explosion-proof | Optional |
| Certification | CE; ISO 9001; ISO 14001 |
The room-temperature range is designated TG-LW-LF07N, TG-LW-LF50N, TG-LW-LFA07N and TG-LW-LFA50N. The parameters above describe the 7 L metering bin build. Additional gravimetric feeder configurations can be customized according to the liquid characteristics and process requirements, so the final code is confirmed against the liquid and the required feed rate.
Bin and frame are SS304, with a tetrafluoro soft connection between the metering bin and the liquid pump so that line movement is kept away from the weighing assembly. Sensor capacity can be set at 36 kg, 60 kg or 100 kg to suit the bin and pump load. The drive is a 1 kW AC motor on 380 V with a single liquid metering pump, and the unit can be supplied with optional electrical explosion-proof execution.
Compounding plastics, chemicals, building materials, food, new energy and medical production lines where liquid additives are dosed by weight. Typical room-temperature liquids are pure water and white oil; the same feeder platform also serves DCP, BDP and paraffin in the heat-preservation W build. Units are specified for outdoor installation, high humidity and dust, from -10 C to 50 C.
Additional gravimetric feeder configurations can be customized according to the liquid characteristics and process requirements. The electrical explosion-proof function is optional, and other special requirements are handled through customized design with fast response.
A one-year feeder program of 200 units was supplied to plastics compounding companies, food producers, chemical companies and users of other continuous production lines. Applications included automatic food batching, metering of color masterbatch and modified-plastics ingredients, continuous feeding in extrusion, and ratio control and continuous conveying in chemical and building-material processes. Reported results were automated batching, more stable formula control and improved production efficiency.
CE verification of conformity ICR/VC/HFG260829, issued by ICR, lists the TG-LW-LF07N, TG-LW-LF50N, TG-LW-LFA07N and TG-LW-LFA50N models alongside the W variants, against EN ISO 12100:2010, EN 60204-1:2018+A1:2025, EN IEC 61000-6-2:2019 and EN IEC 61000-6-4:2019. Factory certificates: ISO 9001:2015 (38524UQN0DP2R0S) and ISO 14001:2015 (38524UE640TRR0S).
Which liquids suit the room-temperature configuration?
Pure water, white oil and similar ambient liquids. Liquids that must be metered warm, such as DCP, BDP and paraffin, use the W build.
Does the feeder support both continuous and batch dosing?
Yes. It is applied to continuous loss-in-weight metering and to intermittent loss-in-weight batch metering.
Which weighing sensor capacity should be selected?
Options are 36 kg, 60 kg and 100 kg. The choice follows the bin and pump load of your configuration and is confirmed with the order data.
What are the electrical requirements?
A 1 kW AC motor on 380 V, with a single liquid metering pump in the standard arrangement.
Can feeding data be collected centrally?
Feed rate, weight data, equipment status and alarm information can be reported to a cloud management platform for centralized operation and maintenance.
What information is needed to confirm a model?
Liquid name, required feed rate, batch size if intermittent, supply voltage and installation environment. Explosion-proof execution is optional where required.
Transcell Intelligent Machinery (Changzhou) Co., Ltd. - Building 9, No.9 Caoxi Road, Niutang Town, Wujin District, Changzhou, Jiangsu, China.
Email info@transcellgroup.com | Tel +86 400-068-3777 | WhatsApp +852 6952 8737 | www.transcellgroup.com
Primary: liquid-loss-in-weight-feeder-lf07n-room-temperature-front.png - alt: Room-temperature liquid loss-in-weight feeder with 7 L bin and single metering pump. Detail: liquid-loss-in-weight-feeder-lf07n-cloud-monitoring-view.png - alt: Cloud monitoring screen showing feed rate and weight data for the liquid feeder.