Product Summary

The Automatic Framing Machine is a servo-driven PV module framing and gluing station built for solar panel manufacturers who are upgrading from manual framing or expanding an existing module assembly line. Each module is framed in about 25 seconds, with opposite-side deviation held to ±0.5mm, diagonal difference within ±1mm and frame crevice kept below 0.3mm.

A double glue head with automatic grabbing swing frame handles frame pick-up and assembly, cutting manual handling steps and stabilising output quality. The machine accepts modules measuring 1630–2500mm long and 950–1400mm wide, and runs on 12KW, 380V/50Hz power with 0.5–0.8MPa compressed air at 400L/min.

Key Features

• 25s per piece cycle time – a steady framing rhythm that keeps pace with an upstream stringer and downstream lamination line instead of becoming a bottleneck.
• Servo high precision framing – opposite-side difference of ±0.5mm and diagonal difference of ±1mm give consistent module outlines and a low defect rate.
• Frame crevice below 0.3mm – tight frame-to-glass fit supports clean silicone curing and reduces rework at final inspection.
• Double glue head with automatic grabbing swing frame – gluing, frame picking and assembly are handled by the machine, reducing operator handling and fatigue.
• Module range 1630–2500mm × 950–1400mm (L×W) – one machine covers the module formats commonly produced on modern PV lines.
• Documented utility profile – 12KW, 380V/50Hz power, 0.5–0.8MPa air source and 400L/min air consumption simplify factory utility planning.

Technical Specifications

Models and Options

The documented configuration is the PV Module Framing Machine with double glue head and automatic grabbing swing frame. It is supplied as a standalone framing unit for existing plants, or as one station inside a turnkey module assembly line covering glass loading, stringing, layup, lamination, framing and EL testing. Module format compatibility is defined by the 1630–2500mm × 950–1400mm range.

Materials and Structure

The frame is built from carbon steel for structural rigidity, aluminum alloy for moving assemblies that benefit from lower weight, and 304 stainless steel on surfaces exposed to glue and cleaning. The layout is 6100 × 3500 × 2650mm, giving the glue head and swing frame clearance to travel around the module without obstruction.

Applications

Installed in PV module manufacturing plants, new energy equipment factories and PV cell module facilities, the machine suits line upgrades, retrofits and manual-to-automatic transformation projects. It runs 24/7 in an indoor, clean and dust-controlled workshop at ambient temperatures of −10 to 40°C. The equipment should be installed in a dry, well-ventilated area free of corrosive gases, with a clean operating zone so debris and dust do not enter the mechanism.

Customization

YNTECH supports layout design, equipment manufacturing, factory installation, commissioning, technical training and after-sales maintenance. Machines can be delivered as standalone units or integrated into a complete solar panel production line, and the company's equipment is built to adapt to conventional, TOPCon, HJT and BC module production. Operators jog each individual mechanism through the operating pendant during setup and changeover.

Case Study

FAQ

Inquiry Information

Send your module size, target output and current line layout for a framing recommendation.

Manufacturer: YN Solar PV Equipment Co., Ltd. (YNTECH), established 2015.

Image Filename and Alt Suggestions

Filename: pv-module-framing-machine-pvfm-double-glue-head-front.png

Alt: Automatic PV module framing machine with double glue head