{{ variable.name }}

The ELORRY three-way tipper truck discharges to the rear, left or right, so the driver can place material along a kerb, into a narrow driveway or over a wall without turning the vehicle. The body style is part of the tipper range and uses side rams for three-way tipping. Tipping angle is 45-55°, lifting time 12-25 s and lowering time 10-20 s, with in-cab PTO control. GVW and body volume are matched to local axle-load limits and material density. The body uses Q235 or Q345 steel, a 4-10 mm floor plate, 3-8 mm side wall and a reinforced front wall.
Side discharge to left or right as well as the rear lets the driver place material along a kerb, into a narrow driveway or over a wall without turning the vehicle.
Three-way tipping matters on urban and landscaping jobs where turning space is limited and material must be placed precisely.
The three-way body uses side rams in addition to the main lift, with 45-55° tip angle and 12-25 s lifting time.
Q235 or Q345 steel, 4-10 mm floor plate, 3-8 mm side wall and a reinforced front wall handle soil, mulch, sand, stone and site spoil.
A gearbox PTO with in-cab control drives the tipping pump, so the operator can manage the discharge from the cab.
| Item | Specification |
|---|---|
| Body style | Three-way tipper |
| Tipping directions | Rear, left, right |
| Hydraulics | Side rams plus main lift |
| Tipping angle | 45-55° |
| Lifting / lowering time | 12-25 s / 10-20 s |
| Working pressure | 160-200 bar |
| Body material | Q235 or Q345 steel |
| Floor plate / side wall | 4-10 mm / 3-8 mm |
| Front wall | Reinforced |
| Tailgate | Top-hinged or pendulum type, manual or automatic release |
| Load cover | Manual roll-over sheet or electric tarpaulin system |
| Cab | 2-3 persons, day cab standard, sleeper cab optional |
| Engine | Diesel 4 or 6 cylinders, 2.8-9.5 L, 130-400 hp |
| Emission | Euro II, III, IV or V; Euro VI on request |
| Steering | Hydraulic power steering; left-hand or right-hand drive |
| Warranty | 12 months for major components with spare-parts support |
| Lead time | About 30 days for orders under 20 units; stock models ship faster |
| Configuration | Options |
|---|---|
| Body style | Three-way tipper |
| Tipping directions | Rear, left, right |
| Hydraulics | Side rams plus main lift |
| Tipping angle | 45-55° |
| Lifting / lowering time | 12-25 s / 10-20 s |
| Body material | Q235 or Q345 steel |
| Floor plate / side wall | 4-10 mm / 3-8 mm |
| Tailgate | Top-hinged or pendulum type, manual or automatic release |
| Load cover | Manual roll-over sheet or electric tarpaulin system |
| GVW and body volume | Matched to local axle limits and material density |
The three-way tipping body uses Q235 or Q345 high-strength structural steel, with a 4-10 mm floor plate, 3-8 mm side wall and a reinforced front wall. Cross bearers support the floor. The subframe is bolted and rubber-mounted to the chassis rails to spread tipping loads. The chassis is a carbon structural steel ladder frame with reinforced cross members. Hydraulics use a hard-chrome-plated telescopic cylinder for the main lift and side rams for three-way tipping, with high-pressure hose and steel pipe. The tailgate can be top-hinged or pendulum type with manual or automatic release. The load cover can be PVC tarpaulin or aluminum roll-over slats.

The body discharges to the rear, left or right using side rams, so the driver can place material along a kerb, into a narrow driveway or over a wall without turning the vehicle.
Urban and landscaping jobs where turning space is limited and material must be placed precisely, including kerbside and narrow driveway work.
GVW and body volume are matched to local axle-load limits and material density. The rigid tipper range covers 3,500-32,000 kg GVW and 2-22 m³ body volume.
Lifting takes 12-25 s, lowering 10-20 s, with a 45-55° tip angle and 160-200 bar working pressure.
Yes. The load cover can be a manual roll-over sheet or electric tarpaulin system, and the tailgate can be top-hinged or pendulum type with manual or automatic release.
4x2 units can ship in a 40-foot container with the body removed or knocked down. Larger tippers ship by flat rack, RoRo or bulk vessel, and mixed models can be consolidated.
12 months for major components with spare-parts support. Lead time is about 30 days for orders under 20 units; stock models ship faster.
Share your material density, site access, tip height, bridge and axle limits, and local registration class. ELORRY sales engineers will recommend the GVW, body volume and tipping direction for your route.
Tel: +86-13083602803
WhatsApp: +86-16638078903
Email: info@elorry-ind.com
Address: Zhengzhou City, Henan Province, China