| Params | operating weight: 1,000 kg bucket capacity: 0.022 m³ engine: KOOP192FA, displacement 0.499 L rated output / speed: 7.6 kW / 3,000 rpm maximum torque: 25 N·m / 2,500 rpm maximum travel speed: 1.2 km/h swing speed: 9 rpm maximum gradeability: 30° maximum digging force: 6.5 kN hydraulic system: gear pump, operating pressure 16 MPa, flow rate 18 L/min hydraulic oil tank: 18 L fuel tank: 5.5 L overall dimensions (L / W / H, transport): 2,950 / 930 / 2,285 mm (2,030 mm without canopy) ground pressure: 0.4 kgf/cm² working range: maximum digging height 2,490 mm, maximum dumping height 1,745 mm, maximum digging depth 1,725 mm, maximum vertical wall digging depth 1,655 mm, maximum digging distance 3,030 mm, minimum turning radius 1,490 mm dozer blade: width 937 mm, height 210 mm, maximum dozing height 170 mm, maximum cutting depth 240 mm undercarriage: rubber track, standard track plate width 180 mm, track centre distance 746 mm standard bucket width: 380 / 330 mm (with / without side teeth) | Material | main structure: S355 steel, laser cut and robot welded side-swing connector: integrated cast steel, no welded joint, four load-bearing faces pins: quenched and tempered, galvanized, surface hardness above 500 HB, internal bushing to reduce friction hydraulic cylinder: high-precision cold-drawn seamless steel tube, concentricity and perpendicularity tolerance within 0.01 mm, NOK sealing rings (Japan) hydraulic hoses: Continental and Danfoss, rated -40 °C to +100 °C, multi-layer steel wire braiding, spring-wrapped protection sleeve tracks: rubber engineering track, Yonggu brand, track plate width 180–300 mm depending on model bucket: wear-resistant high-strength plate with high-manganese steel teeth, replaceable coating: shot blasting plus electrostatic spray, three-layer anti-corrosion finish (two primer coats and one top coat) |
