30% Glass Fiber Reinforced PA6 Nylon Compound for Injection Molding
Grade PA6-WHG30B, a modified polyamide 6 compound reinforced with 30% glass fiber and supplied for injection molding. Grade selection and modification are discussed against your part drawing, load, temperature, humidity and tolerance requirements.
Product Summary
PA6-WHG30B is a modified polyamide 6 (PA6) compound reinforced with 30% glass fiber and supplied as an injection molding compound. The glass-fiber reinforcement is formulated to support stiffness, strength, heat performance and dimensional control in molded parts. Fiber orientation, weld lines, shrinkage and moisture conditioning all influence finished-part behaviour, so the current grade-specific TDS, molded samples and application testing should be confirmed before production approval. Custom color and application-specific modification can be discussed against the confirmed grade.
Key Features
30% Glass Fiber Reinforcement
PA6 modified with 30% glass fiber, formulated to support stiffness and strength in structural molded parts.
Built for Injection Molding
Supplied as an injection molding compound, with molding-window and processing guidance available during evaluation.
Dimensional Control Focus
Developed with dimensional control in mind; shrinkage, fiber orientation and weld lines must be validated on the production tool.
Custom Color and Modification
Color matching plus heat, impact, UV, flame-retardant or hydrolysis-stabilized adjustments can be discussed, subject to the confirmed grade.
Grade-Specific Documentation
TDS and compliance reports are issued according to the exact material grade and application, so documents match the supplied material.
Certified Company Systems
ISO 9001:2015, ISO 14001:2015 and ISO 45001:2018 cover modified plastic pellet design and production as company-level management systems.
Custom color can be discussed; final color confirmed against the approved grade sample
Modification Options
Heat, impact, UV, flame-retardant and hydrolysis-stabilized adjustments available subject to the confirmed grade
Property Data
According to the current grade-specific TDS for PA6-WHG30B
Documentation
Grade-specific TDS and third-party compliance testing records for selected grades, issued per exact grade and application
Glass-fiber compounds are sensitive to moisture conditioning, fiber orientation, weld lines and shrinkage. Confirm property values on the current TDS and validate final-part performance on the production tool.
Representative WanHan PA6 engineering-plastic pellet samples. Pellet appearance only; the exact production color and final grade must be confirmed against PA6-WHG30B samples and the current TDS.
Models and Options
PA6-WHG30B is the grade identified in the available grade data: a PA6 GF30 compound for injection molding.
No alternative PA6 GF30 grades or confirmed modification variants are listed in the supplied material; send your requirements for a comparable grade review.
Color and property adjustments are discussed case by case and remain subject to the confirmed grade.
Materials and Structure
The compound uses a PA6 matrix modified with 30% glass fiber. WanHan produces modified plastic pellets through a controlled compounding route covering incoming material inspection, feeding, extrusion, water cooling, pelletizing, multi-instrument laboratory testing, automatic weighing and packaging. Fiber reinforcement level, moisture conditioning and the molding window all interact with part geometry, so material approval should be based on molded samples and part testing rather than pellet appearance alone.
Applications
Automotive structural parts
Power tools
Switches and electrical structures
Gears, bearings and machinery components
Home appliances
Sporting and garden equipment
Customization
Custom color matching, glass-fiber reinforcement, heat stabilization, flame-retardant modification, toughness modification, formulation development, sample evaluation and injection-molding processing guidance can be discussed for your application. Please share the part drawing or 3D data, service temperature, load, humidity exposure, tolerance requirements and any compliance target so a suitable grade and modification route can be reviewed.
Case Study
France, appliance and injection-molding material buyer: a 250 kg PA6 GF30 trial order was completed in 2026. The work covered PA6 GF30 grade confirmation, color and packaging review, test-method alignment, molding-window discussion and shipment preparation. A larger trial quantity supports molding-window, dimensional and part-performance validation beyond a small laboratory sample. Production approval and field performance are not claimed without customer evidence.
Norway, multi-grade screening: a completed sample order covered PA6, PA66, PA11 and PA12 grades (60 kg, USD 1,250.80) for automotive and additive-manufacturing evaluation, allowing the buyer to compare polyamide families before selecting the next development grade.
FAQ
What is PA6-WHG30B?
A modified polyamide 6 compound reinforced with 30% glass fiber and supplied for injection molding.
Which processing method does this grade suit?
Injection molding. Molding-window discussion is part of the evaluation support.
Can I request a custom color or a modified grade?
Custom color and application-specific modification can be discussed; the final formulation, color and properties are subject to the confirmed grade.
Do you provide a TDS?
Yes. TDS and compliance documents are issued according to the exact material grade and application, so request the TDS matching PA6-WHG30B.
What should be validated before mass production?
Moisture conditioning, fiber orientation, weld lines, shrinkage and final-part performance should be validated on the production tool.
What are the minimum order quantity and lead time?
The published company profile lists a 5 kg minimum order quantity and a 7-10 day custom-grade lead time; confirm both for PA6-WHG30B with the sales team.
Do the ISO certificates certify this grade?
No. ISO 9001, ISO 14001 and ISO 45001 are company management system certificates covering the design and production of modified plastic pellets; they do not certify individual grade performance.
Inquiry Information
Guangdong Wanhan New Material Technology Co., Ltd. | Email: gdwanhan@163.com
Address: No. 3 Xingqi East Road, Dongxing District, Dongjiang Science and Technology Park, Zhongkai High-tech Zone, Huizhou City, Guangdong Province, China
ISO 9001:2015ISO 14001:2015ISO 45001:201870% Export Ratio
Listing and SEO Data
Product Listing Title / H1: 30% Glass Fiber Reinforced PA6 Nylon Compound for Injection Molding
SEO Title: 30% Glass Fiber Reinforced PA6 Nylon Compound for Injection Molding
Meta Description: Modified PA6 compound with 30% glass fiber reinforcement for injection molding, offering stiffness, strength and dimensional control. Custom colors on request.
