Product Summary

The CDD-BS5JMW is a digital FPV camera built around a SONY image sensor and a split main board / camera head design. It delivers 3840x2160 at 30fps, 1080p at 90fps and 720p at 120fps through a 120° field of view, and carries OSD data over both MSP and MAVLink protocols. The main board measures 32x32x12mm with 25.5x25.5mm mounting holes, the camera head measures 19x19x26mm, and the two parts weigh 9g and 17g.

Power input spans 9-30V with a maximum draw of 2.5W, so the camera can be fed from common drone, robot and RC platforms without a separate regulator in most builds. A TF card slot supports cards up to 1TB for onboard recording. The housing is aluminum alloy and the lens assembly combines glass and plastic elements. The camera is positioned for tactical drone, drone manufacturing, intelligent robot and surveillance / reconnaissance equipment programs.

Key Features

Technical Specifications

Models and Options

This page documents one configuration, the CDD-BS5JMW. The specification table above lists the only resolution, FOV, voltage and dimension figures released for this model, so buyers should treat those values as the reference configuration rather than a menu of alternatives.

For projects that need a different mechanical fit, cable arrangement or firmware integration, IRLAB runs OEM/ODM programs backed by in-house software, hardware, mechanical structure and video image tuning teams. Share your airframe drawing, rail voltage and required OSD messages with the engineering contact below and the scope can be reviewed against this platform.

Materials and Structure

The camera is housed in aluminum alloy, which gives the body a rigid shell around the sensor and lens assembly. The lens itself combines glass and plastic elements. The design is split into two parts: a 19x19x26mm camera head weighing 9g and a 32x32x12mm main board weighing 17g, connected as a single system.

The main board carries 25.5x25.5mm mounting holes, a pattern widely used on drone stacks, so the board can be bolted to a standard frame plate while the small camera head is placed where the view is needed. Total system weight is 26g.

Applications

• Military and tactical equipment — the camera is listed for tactical FPV use where a compact, alloy-housed imaging head is required.
• Drone manufacturing — 25.5x25.5mm mounting, 9-30V input and 26g total weight suit production airframes.
• Intelligent robots — MSP and MAVLink OSD output lets the camera report into an existing control stack.
• Surveillance and reconnaissance equipment — 4K capture and up to 1TB TF recording keep footage locally on the platform.
• RC car FPV — the wide 120° FOV and wide voltage range also fit ground vehicles.

Customization

IRLAB offers flexible OEM/ODM services. The company's engineering base covers software, hardware, mechanical structure and video image tuning in house, which is the relevant capability when adapting a camera platform to a specific airframe or ground vehicle. Founded in 1992 in Taiwan and established in Shenzhen in 2003, IRLAB operates a 3,000m² facility with 100+ employees, including 10+ engineers, and is certified under TÜV's ISO9001 quality control system.

Customization enquiries should state the target resolution mode, OSD message set, harness length and connector, and mounting constraints. Any scope agreed is confirmed in writing per project.

FAQ

Inquiry Information

Image Filename and Alt Suggestions

fiber-fpv-camera-cdd-bs5jmw-front-angle.png — CDD-BS5JMW FPV camera front view with aluminum alloy housing

Suggested additional shots once available: main board face showing 25.5x25.5mm mounting holes (fiber-fpv-camera-cdd-bs5jmw-main-board-25mm-mount.png), and camera head side profile for scale (fiber-fpv-camera-cdd-bs5jmw-camera-head-19mm.png). Only the product image above is currently supplied; no other images are published on this page.