Source TDS Grade PA6 WHRG30A
V-0 Flame-Retardant PA6 GF30 Nylon Compound for Electrical Housings
30% glass-fiber reinforced, flame-retardant modified PA6 compound supplied as ready-to-mold pellets for injection molding. Source TDS typical values include 125 MPa tensile strength, 180 °C heat deflection temperature and 0.5% molding shrinkage.
SEO TitleV-0 Flame-Retardant PA6 GF30 Nylon Compound for Electrical Housings
Meta DescriptionPA6-WHRG30A modified PA6 with 30% glass fiber and V-0 flame retardant, tensile strength 125 MPa and HDT 180 °C for electrical and electronic housings.
URL Slugpa6-gf30-fr-v0-nylon-compound
Product Summary
PA6-WHRG30A is a modified polyamide 6 compound reinforced with 30% glass fiber and formulated with a flame-retardant additive system. The source technical data sheet lists a UL 94 V-0 flammability classification, a tensile strength of 125 MPa (ISO 527-2), a flexural strength of 185 MPa with a flexural modulus of 6,800 MPa (ISO 178), a notched Izod impact of 15 kJ/m² (ISO 179) and a heat deflection temperature of 180 °C (ISO 75-2/B).
The material is supplied as compounded pellets for injection molding of electrical and electronic housings and structural molded parts where flame-retardant material screening is part of the selection process. All figures above are typical values from the source TDS and are not a substitute for a grade-specific data sheet revision.
Thickness confirmation required: the TDS states UL 94 V-0 but does not state the specimen thickness used. Confirm the exact thickness and the current test report before using this grade in a certified assembly.
Key Selling Points
- 30% glass fiber reinforcement with 125 MPa tensile strength (ISO 527-2) — gives molded parts the stiffness and load-bearing capability required for structural housings and internal support components.
- Flexural strength 185 MPa and flexural modulus 6,800 MPa (ISO 178) — helps designers predict bending behaviour in ribs, bosses and snap-fit features.
- TDS-listed UL 94 V-0 flammability classification — supports flame-retardant material screening for electrical and electronic parts, subject to confirmation of the tested specimen thickness.
- Heat deflection temperature of 180 °C (ISO 75-2/B) — allows the grade to be evaluated for parts exposed to elevated service temperatures near heat-generating components.
- Low molding shrinkage of 0.5% (ISO 2577) — supports dimensional control in tight-tolerance injection-molded parts and consistent tooling design.
- Density 1.52 g/cm³ (ISO 1183) and notched Izod 15 kJ/m² (ISO 179) — lets buyers calculate part weight and assess impact performance before tooling release.
Technical Specifications
| Property | Typical Value | Test Method / Note |
|---|
| Base polymer | Modified PA6 (polyamide 6) | With glass fiber and flame-retardant additive |
| Glass fiber content | 30% | Grade designation (GF30) |
| Flammability | UL 94 V-0 (as stated in TDS) | Specimen thickness not stated in source TDS |
| Tensile strength | 125 MPa | ISO 527-2 |
| Flexural strength | 185 MPa | ISO 527-2 (per TDS) |
| Flexural modulus | 6,800 MPa | ISO 178 |
| Notched Izod impact | 15 kJ/m² | ISO 179 |
| Heat deflection temperature | 180 °C | ISO 75-2/B |
| Density | 1.52 g/cm³ | ISO 1183 |
| Molding shrinkage | 0.5% | ISO 2577 |
| Delivery form | Compounded pellets for injection molding | Grade: PA6 WHRG30A / model PA6-WHRG30A |
Values are typical TDS figures for the named grade. Request the current TDS revision and test reports for the exact grade, colour and application before design release.
Models and Options
The source TDS covers one grade: PA6 WHRG30A, supplied under model reference PA6-WHRG30A. Buyer-specific options are developed through formulation work rather than fixed catalogue models, and include glass-fiber reinforcement, flame-retardant modification, heat stabilization, toughness modification and colour matching. Final grade code, colour and TDS revision are confirmed against the project before order placement.
Materials and Structure
The compound is built on a polyamide 6 base polymer combined with 30% glass fiber and a flame-retardant additive system. WanHan produces modified engineering plastic compounds through controlled incoming-material inspection, feeding, extrusion, water cooling, pelletizing, laboratory testing and automatic weighing and packaging, under ISO 9001:2015 quality management, ISO 14001:2015 environmental management and ISO 45001:2018 occupational health and safety management systems.
Applications
This grade is intended for electrical and electronic housings and structural injection-molded parts where a flame-retardant material screening step is required. Final assembly requirements, wall thickness and compliance targets must be verified by the buyer.
Electrical housings
Electronic enclosures
Structural molded parts
Internal support components
Customization
WanHan provides material selection, custom formulation development, glass-fiber reinforcement, heat stabilization, flame-retardant modification, toughness modification, colour matching, sample evaluation and injection-molding processing guidance. Technical data and third-party compliance testing records are provided according to the exact grade and application. The company publicly states a minimum order quantity of 5 kg and a custom-grade lead time of 7–10 days for its PA66 GF30 line; MOQ and lead time for PA6 WHRG30A should be confirmed against the final formulation.
FAQ
1. Is PA6-WHRG30A UL 94 V-0 rated?
The source TDS states UL 94 V-0. The TDS does not state the specimen thickness, so the rating must be confirmed against the exact thickness and the current test report before use in a certified assembly.
2. What glass fiber content does this grade use?
30% glass fiber, as indicated by the grade designation GF30 and the grade name PA6 WHRG30A.
3. What are the typical mechanical values?
Tensile strength 125 MPa (ISO 527-2), flexural strength 185 MPa (ISO 527-2 per TDS), flexural modulus 6,800 MPa (ISO 178) and notched Izod impact 15 kJ/m² (ISO 179). These are typical values only.
4. What heat resistance can be expected?
The TDS lists a heat deflection temperature of 180 °C under ISO 75-2/B. Suitability for a specific part depends on wall thickness, load and service time, so share your design conditions for evaluation.
5. What is the minimum order quantity and lead time?
WanHan publicly states a 5 kg minimum order quantity and a 7–10 day custom-grade lead time for PA66 GF30. Confirm MOQ and lead time for PA6 WHRG30A with the supplier at the quotation stage.
6. Can colour and formulation be customized?
Colour matching, glass-fiber reinforcement, heat stabilization, flame-retardant modification, toughness modification and custom formulation development are listed company services. The resulting grade is supplied with its own TDS.
7. Can I get samples for molding trials?
The company supports sample-stage evaluation before volume production. Request samples against the exact grade and application so that the documentation matches the material supplied.
8. What documentation is supplied with the material?
Product TDS, compliance reports and other technical documents are provided according to the exact grade and application requirements. State the required documents in your inquiry.
Image Filename and Alt Suggestions
Suggested filename: pa6-whrg30a-flame-retardant-glass-fiber-nylon-compound-pellets.png
Suggested alt: PA6-WHRG30A flame-retardant glass-fiber reinforced nylon 6 compound pellets
